Topic: DLink 5222L Rev A - Weird password loop (Read 3461 times)

Acumen · « **on:** February 18, 2016, 10:22:45 AM »

Hi,

Today I created a separate bridge/LAN for my cameras. This LAN has a different IP-range and so the camera received a different IP address from the DHCP server.
No problem so far. My DCS-2332L works flawless. The DCS-5222L does also operate fine, reacting on motion detection, FTP video to the FTP server, etc, but....

When you log on to the device web-interface, the live stream is shown. When you click on the SETUP tab, I get prompt to reenter my credentials. When I do, it loops and keeps asking for my credentials. When I connect the camera to the original LAN, and serving the IP address it had for years, everything works fine again. When I leave it at the original LAN and give it another IP address within the same range (x.y.z.70 -> x.y.z.161), the problem occurs again...

I searched on the forum and via Google, but cannot find any post on this problem. I even downgraded from version 1.14 to version 1.12, but that did not help either...

Has anyone ever experienced this behavior and managed to solve it?

A reaction is highly appreciated.

A.

RYAT3 · « **Reply #1 on:** February 18, 2016, 01:02:09 PM »

Is the browser storing the password? Try a different one.

Acumen · « **Reply #2 on:** February 22, 2016, 11:36:26 AM »

Hmmm... I don't see what difference that makes.
I however tested with Firefox and Internet Explorer before posting at the forum.
I switched back to its original IP address and am able to manage the camera again. Interesting is that the same problem occures when I connect to the camera via its internal DNS name.

I will see if there is anything I can do to fix this and if so, report it in this topic.

Acumen · « **Reply #3 on:** February 22, 2016, 12:37:52 PM »

Well, since there was not much to change, I decided to reset to the factory defaults and everything came back like it should.
Since I am afraid that restoring the backed-up config will restore the problem, I manually configured the cam and so far everything looks fine.
If that changes, I will report.

Thanks for your reply

FurryNutz · « **Reply #4 on:** February 22, 2016, 02:37:13 PM »

Sometimes save configurations files can be generated as corrupt then using them again may cause problems. I recommend that after doing a factory reset, that if the new configuration works, save a new configuration to file. I would use IE or FF.

Acumen · « **Reply #5 on:** February 23, 2016, 06:48:57 AM »

We have the same oppinion. Manually reconfigured the cam and saved the working config.

Case closed for me

FurryNutz · « **Reply #6 on:** February 23, 2016, 06:55:45 AM »

Enjoy.

D-Link Forums

News:

Author Topic: DLink 5222L Rev A - Weird password loop (Read 3461 times)

Acumen

DLink 5222L Rev A - Weird password loop

RYAT3

Re: DLink 5222L Rev A - Weird password loop

Acumen

Re: DLink 5222L Rev A - Weird password loop

Acumen

Re: DLink 5222L Rev A - Weird password loop

FurryNutz

Re: DLink 5222L Rev A - Weird password loop

Acumen

Re: DLink 5222L Rev A - Weird password loop

FurryNutz

Re: DLink 5222L Rev A - Weird password loop (RESOLVED)