D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-932L => Topic started by: antoinekl1 on November 02, 2014, 11:53:36 PM
-
Hi
Please, can you give me HTTP link to control the camera, especially for activation or deactivation of the motion detection
thank you
-
You can use the mydlink.com (http://mydlink.com) services and the mobile phone app to connect to the camera...
-
yes i now, thank but i want start the motion camera with a link http, it is possible with another camera, why not the 932L ?
-
What is the IP address of the 932L after it's connected to the main host router?
What ever that IP address is, you should be able to connect to the camera with that IP address...
I recommend setting a static IP address on the camera, i.e. 192.168.0.32 that way you know what the IP address is and it never changes.
-
I'm not clear, i can connect to my camera with my external IP
i want that : http://login:password@ipadress:port/config/motion.cgi?enable=yes&sensitivity=50
But it's not OK with 932l
-
You maybe need to set up a Port Forward rule possibly to do that.
What is your ISP modem and main host router Mfr and Model #?
-
It's OK for that, i can contol my camera with IP and port but the link http is not OK for the 932l caméra, peraps it is a another link ?
-
Might want to get a hold of JavaLawyer and ask to see if he has more info...send him a PM.
-
This is done since this morning, but no answer yet :)
-
He's been busy with non forum life so please be patient. I'll try and contact him and see if he can check this out.
Thank you.
-
No problem, Thank you for your help
-
We have a collection of URL commands here for different models, you'll have to perform some testing to see if any of these work:
- DCS Network Cameras - URL Command List (http://forums.dlink.com/index.php?topic=59172.0)
- DCS Network Cameras - URL Command Lines Forum Member Feedback (http://forums.dlink.com/index.php?topic=59173.0)
-
i saw, thanks but no link works :-(
-
You might phone contact D-Link support and ask them if there is a link configuration that is supported on this model camera. Let us know how it goes...
-
i saw, thanks but no link works :-(
Unfortunately these are the only options we know of. The DCS-932L user community tried long and hard to come up with supported commands for all camera modals and the referenced link is the result of those efforts.