D-Link Forums

The Graveyard - Products No Longer Supported => D-Link Storage => DNS-323 => Topic started by: Vedran on May 04, 2011, 04:17:55 AM

Title: DNS1 DNS2
Post by: Vedran on May 04, 2011, 04:17:55 AM

Could someone explain me what should I put in LAN settings under DNS1 and DNS2 input
My current settings are:
DNS-323 static IP: 192.168.10.150
Subnet mask:        255.255.255.0
Gareway:              192.168.10.1
DNS1:
DNS2:

Router IP:             192.168.10.1
Router WAN IP:      81.123.123.127

Title: Re: DNS1 DNS2
Post by: dosborne on May 04, 2011, 04:34:37 AM

THe Domain Name Server (DNS) is where your PC, NAS etc go to lookup IP addresses form a hostname. If for example youe type www.google.com then the DNS looks up the IP address of that domain.

If you do not run your own DNS server, then enter the DNS server IP addresses provided by your ISP, the same ones that you use for your computer. If your somputer uses dynamic addressing (DHCP) then it may get the DNS server IP addresses automatically when you connect to the internet. You can display your DNS server addresses (and other information) by starting a command window and typing "ipconfig /all".

Title: Re: DNS1 DNS2
Post by: Vedran on May 04, 2011, 05:19:15 AM

Great, I found it with ipconfig/all.
Thank you