Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[FurryNutz]

Kewl beans. Thank you Sir. 

[guanliangp]

thanks, this new viewer works well on my device DNR202L. good to uninstall the older version and install this one. try my home 4 unit of pc (windows 10 version 1909)

[FurryNutz]

Thanks for letting us know.

Enjoy. 

thanks, this new viewer works well on my device DNR202L. good to uninstall the older version and install this one. try my home 4 unit of pc (windows 10 version 1909)

[geetee2]

let us know when it becomes NON BETA. tks

[GreenBay42]

Does the beta work?

[geetee2]

yes

[geetee2]

the latest 202l firmware is flawed.

since installing it, roughly every 45 minutes, the 202l emits a loud long beep (the record light remains recording)......  i revert to the previous formware (the 2020 bug ) and no more beeps.   reinstall latest firmware and beeps again

[FurryNutz]

Even after a factory reset and setup from scratch?
Others haven't reported this...Not seen on mine...

[geetee2]

then I am first to report it.

see syslog.  shows device restarting.

2020/02/17, 06:58:42, network set to static IP 150.233.25.54
2020/02/17, 06:58:44, usb1 mounted successfully.
2020/02/17, 06:58:57, system set to new time 2020/02/17 06:59:02.
2020/02/17, 07:04:54, system watch-dog reboot.(code 64)
2020/02/17, 07:05:25, system power on.
2020/02/17, 07:05:28, network set to static IP 150.233.25.54
2020/02/17, 07:05:30, usb1 mounted successfully.
2020/02/17, 07:44:06, system watch-dog reboot.(code 64)
2020/02/17, 07:44:36, system power on.
2020/02/17, 07:44:39, network set to static IP 150.233.25.54
2020/02/17, 07:44:42, usb1 mounted successfully.
2020/02/17, 08:32:42, system watch-dog reboot.(code 64)
2020/02/17, 08:33:12, system power on.
2020/02/17, 08:33:15, network set to static IP 150.233.25.54
2020/02/17, 08:33:15, usb1 mounted successfully.
2020/02/17, 11:12:53, system watch-dog reboot.(code 64)
2020/02/17, 11:13:26, system power on.
2020/02/17, 11:13:29, network set to static IP 150.233.25.54
2020/02/17, 11:13:31, usb1 mounted successfully.
2020/02/17, 13:37:32, system watch-dog reboot.(code 64)
2020/02/17, 13:38:00, system power on.
2020/02/17, 13:38:03, network set to static IP 150.233.25.54
2020/02/17, 13:38:06, usb1 mounted successfully.
2020/02/17, 13:38:17, system set to new time 2020/02/17 13:38:22.
2020/02/17, 16:26:05, system watch-dog reboot.(code 64)
2020/02/17, 16:26:33, system power on.
2020/02/17, 16:26:36, network set to static IP 150.233.25.54
2020/02/17, 16:26:38, usb1 mounted successfully.
2020/02/17, 18:33:14, system watch-dog reboot.(code 64)
2020/02/17, 18:33:46, system power on.
2020/02/17, 18:33:49, network set to static IP 150.233.25.54
2020/02/17, 18:33:51, usb1 mounted successfully.
2020/02/17, 18:38:34, admin login Ok from 150.233.25.37

[geetee2]

you can see the issue here with new firmware:

2020/02/17  20:18:37  admin login Ok from 150.233.25.37
2020/02/17  20:08:06  usb1 mounted successfully.
2020/02/17  20:08:03  network set to static IP 150.233.25.54
2020/02/17  20:08:00  system power on.
2020/02/17  20:07:32  system watch-dog reboot.(code 64)

new formware is causing a reboot via watchdog.....

[FurryNutz]

Even after a factory reset and setup from scratch?
Is the DNR set for automatic DHCP IP addressing or a static IP.
Using a 150 IP address range?

2020/01/21, 16:39:11, admin login Ok from 192.168.0.125
2020/01/21, 16:42:26, usb1 unmounted successfully.
2020/01/21, 16:42:31, system normal power off.
2020/01/21, 16:45:07, system power on.
2020/01/21, 16:45:10, network set to static IP 192.168.0.202
2020/01/21, 16:45:10, usb1 mounted successfully.
2020/01/21, 16:47:19, admin login Ok from 192.168.0.125
2020/01/21, 16:52:09, system power reboot.
2020/01/21, 16:52:29, usb1 unmounted successfully.
2020/01/21, 16:52:36, system normal power off.
2020/01/21, 16:53:10, system power on.
2020/01/21, 16:53:13, network set to static IP 192.168.0.202
2020/01/21, 16:53:13, usb1 mounted successfully.
2020/01/21, 16:54:35, admin login Ok from 192.168.0.125
2020/01/21, 17:00:38, admin login Ok from 192.168.0.125
2020/01/28, 17:13:50, system set to new time
2020/02/17, 21:47:13, admin login Ok from 192.168.0.107

I don't see this watch dog entry on mine.

What cameras are you recording from?
What kind of USB drive do you have connected?

[geetee2]

nothing has changed for years.  issue is the new firmware

[FurryNutz]

Even after a factory reset and setup from scratch?

[Professor]

I have had an occasional (once every few days) long loud beep from the using the new beta firmware.  Can't pin it down to any specific events though.  Other than that everything works OK - no recording or playback problems

[FurryNutz]

Can you check your Logs to see if you see any of these in the logs?
system watch-dog reboot.(code 64)

Has your DNR been factory reset and setup from scratch since the FW update?

I have had an occasional (once every few days) long loud beep from the using the new beta firmware.  Can't pin it down to any specific events though.  Other than that everything works OK - no recording or playback problems