Cosmetic issue with current 1.03b4 (also occurred with the original 1.01 my DNS-320L was shipped with...)
In the "sytem status | resource monitor - the "bandwidth" graph auto-scaling of the Y axis does not handle data rates above 100Mbit/sec
(a) With the network (GbE) idle or with nothing above 100Mbit/sec the scale is drawn from 0 to 100, filling the whole of the Y-axis.
(b) When data rates above 100Mbit/sec occur, the graph itself appears to be drawn in the correct proportion, but the Y-axis labelling then becomes squashed towards the bottom. In the extreme case with a burst of full gigabit activity, all of the Y-axis labelling 0 to 100 gets drawn right at the bottom in an untidy mess.
Regards,
Richard