• March 28, 2024, 09:46:13 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 936L Disconnecting(sorta)  (Read 4460 times)

PeepMe

  • Level 2 Member
  • **
  • Posts: 32
936L Disconnecting(sorta)
« on: February 15, 2019, 12:16:56 PM »

Greetings!

I'm quite perplexed... I have 2 DCS-934L cameras as well as 1 DCS-936L.
I recently had an issue (couldn't get it to link to my mydlink account otherwise worked fine) with 1 of the 934L cameras which was easily resolved once I was put on the right path.

In the last few weeks, the 936L appears to disconnect. In the mydlink app there is a red x next to this camera, in the app I use to view all cameras (tinycam) it has camera failed. HOWEVER, when I look in my router settings it has the camera as listed as a connected device. The RSSI level is -63 which is the same as the other cameras that are working properly.

  • I have unplugged and plugged back in, it works for about 5-7 minutes and the cycle repeats.
    I have reset the camera and the same thing happens it works for 507 minutes (maybe 10) and then "disconnects"

Is there anything else I can try??

Thanks a bunch!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 936L Disconnecting(sorta)
« Reply #1 on: February 15, 2019, 12:24:46 PM »

What router are you using now? Last time you posted you had a Xfinity Wireless Gateway 3 /TG1682G.
Is uPnP and uPnP Port Forwarding enabled on the cameras?
Test the 936L online while the other two cameras are unplugged from there power outlet.
FW up to date on the 936L?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

PeepMe

  • Level 2 Member
  • **
  • Posts: 32
Re: 936L Disconnecting(sorta)
« Reply #2 on: February 15, 2019, 12:27:53 PM »

What router are you using now? Last time you posted you had a Xfinity Wireless Gateway 3 /TG1682G.
Is uPnP and uPnP Port Forwarding enabled on the cameras?
Test the 936L online while the other two cameras are unplugged from there power outlet.
FW up to date on the 936L?

Hey FurryNutz! Thanks for the response.

Yup same router.
I will check if it is enabled on this one it is not on the 934Ls
Yes, firmware up to date.
Ok, I will do that test and get back to you...
Logged

PeepMe

  • Level 2 Member
  • **
  • Posts: 32
Re: 936L Disconnecting(sorta)
« Reply #3 on: February 15, 2019, 01:15:19 PM »

What router are you using now? Last time you posted you had a Xfinity Wireless Gateway 3 /TG1682G.
Is uPnP and uPnP Port Forwarding enabled on the cameras?
Test the 936L online while the other two cameras are unplugged from there power outlet.
FW up to date on the 936L?

Hey FurryNutz! Thanks for the response.

Yup same router.
I will check if it is enabled on this one it is not on the 934Ls
Yes, firmware up to date.
Ok, I will do that test and get back to you...

Ok only uPnP was checked
unplugged 934Ls and rebooted the 936L
The same thing happened except it lasted a bit longer. Approximately 12 minutes.
Should I check  uPnP Port Forwarding as well?
What's the connection?

Thanks
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 936L Disconnecting(sorta)
« Reply #4 on: February 15, 2019, 01:24:07 PM »

uPnP PF is only needed with you have two or more cameras online at the same time if I remember right.
What router are you using now?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

PeepMe

  • Level 2 Member
  • **
  • Posts: 32
Re: 936L Disconnecting(sorta)
« Reply #5 on: February 15, 2019, 01:51:25 PM »

uPnP PF is only needed with you have two or more cameras online at the same time if I remember right.
What router are you using now?

Same xfinity router
Logged

PeepMe

  • Level 2 Member
  • **
  • Posts: 32
Re: 936L Disconnecting(sorta)
« Reply #6 on: February 16, 2019, 05:09:37 PM »

uPnP PF is only needed with you have two or more cameras online at the same time if I remember right.
What router are you using now?

Same xfinity router

BTW DLink's response to the same issue:
you could try to upgrade the firmware of the camera and also try to change the Wireless channel of your router to channels 1,6 and 11 to avoid signal interference that may be causing the problem.

I changed the channel from 6 to 11 with no change in outcome.  I really have no idea what the issue could be. It makes absolutely no sense
Logged

PeepMe

  • Level 2 Member
  • **
  • Posts: 32
Re: 936L Disconnecting(sorta)
« Reply #7 on: February 18, 2019, 08:12:05 AM »

uPnP PF is only needed with you have two or more cameras online at the same time if I remember right.
What router are you using now?

Same xfinity router

BTW DLink's response to the same issue:
you could try to upgrade the firmware of the camera and also try to change the Wireless channel of your router to channels 1,6 and 11 to avoid signal interference that may be causing the problem.

I changed the channel from 6 to 11 with no change in outcome.  I really have no idea what the issue could be. It makes absolutely no sense

Ok...so I reset phone from the reset button more than once before posting here.
Last night I tried resetting from the admin settings and it’s working fine now. It has been on for 12 hours. 
There is an interesting issue that has come out of this with the third party app that I will have to follow up on but I think it may speak to a vulnerability with this camera. I’ll know more after messaging the developer.
Thanks for all your help...I think this is the most issue I’ve head with this camera in 5 years so I think I’m ok with it lol
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 936L Disconnecting(sorta)
« Reply #8 on: February 18, 2019, 09:34:11 AM »

Enjoy.  ;)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.