D-Link Forums
The Graveyard - Products No Longer Supported => D-Link Storage => DNS-343 => Topic started by: coleman on January 30, 2010, 12:23:44 PM
-
Hello,
I've had a DNS-343 for a little under a year now, and while I've been happy with it's capabilities I've been a little underwhelmed by the performance. That said, I'm not sure that I have a good handle on what I should reasonably expect. Reviews I read prior to purchasing made me think that it would do a little better then what I've been getting.
My home network is based around a single 16 port 3Com GigE unmanaged switch. Cables to the hosts are call Cat 5E or Cat6, pre-made. Jumbo packets are not currently enabled on any hosts.
The NAS is running 1.03, but no funplug or anything. The NAS has 4 1.5GB disks in it, formatted ext2, each disk is running individually. Both my laptop and desktop are Windows 7 x64 machines. The desktop disk is actually one I replaced in the NAS with a larger disk.
I did a test today copying a large file (~4.4GB) around:
Source | Dest | Time |
NAS | Laptop | 15m 35s |
Laptop | NAS | 6m 58s |
Laptop | Desktop | 2m 6s |
Desktop | Laptop | 1m 50s |
Is that just what I should expect?
Thank you!
Edit:Not doing JBOD or RAID.
-
My DNS-343 is configured identically to yours except I'm using 2TB HDDs. A similarly sized file transfer typically takes ~8 minutes (NAS -> PC) and ~11 minutes (PC -> NAS). Network configurations aside, the HDD spin rates will also impact your transfer speeds.
-
Well 3 of the 4 are 7200 RPM disks. One is a new WD, one of the green ones, but that's not the one I benchmarked. And I know the 3 7200s should be at least as fast as the disk that's in the desktop, but they aren't even close. Anyway, 4MB/sec would be pathetic for a modern disk, if that's all it could manage.
I would understand more if I had a bunch of RAID overhead, but since I'm not doing that I'm a little surprised that it's as slow as it is. It's got me contemplating building a WHS machine or putting a file server together again, which is unfortunate, as I wanted a NAS to get away from running a full blown server, but the slow performance is starting to bother me.
-
I share you sentiments. I purchased my DNS-343s primarily for the networked storage capacity, with performance as a secondary consideration. The unit serves it's purpose as a means of high capacity storage, but the transfer rates are wanting.
-
i'm getting about 6 minutes for an 8 gig file transfer.
-
Few questions:
- What are the HDD(s) manufacturer and model
- When you look at the specs for the HDD(s), what is the cache size
- Are there any jumpers installed on the HDD's to step them down to 1.5 Mbps (some HDD's ship jumpered for 1.5 instead of 3.0)
Cheers,
-
It depends on your network as well. For example if you are on a 100Mbps network you'll only be able to do somewhere south of 12.5MBps.
-
I expected more too,
I'm using 8port-linksys G-Ethernet switch on Win7-64bit.
Transfer PC > Raid-0 12MB Ext-3
Transfer Raid-0 > PC 35MB Ext-2
Transfer PC > Raid-5 10MB
Transfer Raid-0 > PC NA
I just changed from 2x 2TB Raid-0 to 4x 2TB Raid-5 and am transfering data back to NAS (I backed up my data to my PC's Raid-0 4TB ( 2x 2TB ).
So Trasfering 3TB of data is more like days not hours.
Anyone know how to get a faster trasfer rate? A Win7 port setting?
New to this, first wanted fast-Big storage but now want safe data (DNS-323 died with Raid-0 2x 1TB, not sure if its the NAS or the Drives yet, need to pull out drives to test).
Kurt