• June 19, 2024, 04:45:22 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 2 3 [4] 5

Author Topic: FORUM USER REQUESTS and BUGS  (Read 63179 times)

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #45 on: March 29, 2014, 10:40:23 AM »

Not all pages will will the MAC address. MAC address should be displayed on the Setup/Networking page.

Are the UKNOWNS being displayed under the Statistics page have a set reserved IP address, Host Name and a Host Name value on the device? IT's possible that maybe Statistics is also dependent upon the device having a host name value inputted on the device or that Statistics relies on product ID name maybe which is a hidden ID name on the device.

Please post screen captures of the sections in question...
« Last Edit: March 29, 2014, 12:07:25 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

WirelessWeaver

  • Level 1 Member
  • *
  • Posts: 13
Re: FORUM USER REQUESTS and BUGS
« Reply #46 on: March 29, 2014, 02:07:27 PM »

Are the UKNOWNS being displayed under the Statistics page have a set reserved IP address, Host Name and a Host Name value on the device? IT's possible that maybe Statistics is also dependent upon the device having a host name value inputted on the device or that Statistics relies on product ID name maybe which is a hidden ID name on the device.

Please post screen captures of the sections in question...

Five "UNKNOWN", zero "undefined" this time:
http://postimg.org/image/3qyaa4ssx/
« Last Edit: March 30, 2014, 12:32:34 PM by FurryNutz »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #47 on: March 30, 2014, 12:33:38 PM »

And do those "UNKNOWNS" devices have host names values set?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

dyvurcz

  • Level 3 Member
  • ***
  • Posts: 173
Re: FORUM USER REQUESTS and BUGS
« Reply #48 on: April 17, 2014, 03:57:25 AM »

Feature Request: port triggering support. Would help a great deal in multi console homes.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #49 on: April 17, 2014, 09:03:01 AM »

This feature maybe something thats incompatible with SB. Added anyways.

Feature Request: port triggering support. Would help a great deal in multi console homes.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #50 on: April 17, 2014, 09:03:38 AM »

Feature Requests:
  • [Added April 17, 2014]
    Port Triggering support. Would help a great deal in multi console homes.

  • [Added March 17, 2014]
    “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
     
    Guest network.  (Gamers also have friends and family visit).
    Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.

    Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November"

  • [Added February 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.

    I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.

    I would like Playstation 4 support as well as Battlefield 4 support on the ps4."

  • [Added December 09, 2013] User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Special Applications page.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 06, 2013] IPv6 support.
    Under review and consideration with D-Link at this time.

  • [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
    Under review and consideration with D-Link at this time.

  • [Added August 07, 2013] DLNA certification.
    Under review and consideration with D-Link at this time.
     
  • [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
    Under review and consideration with D-Link at this time.

  • [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
    Under review and consideration with D-Link at this time.
     
  • [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
    Under review and consideration with D-Link at this time.
     
  • [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
    Under review and consideration with D-Link at this time.
     
  • [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
    A feature that maybe incompatible with Streamboost.

  • [Added August 25, 2013] Inline documentation of the 4500.
    Under review and consideration with D-Link at this time.




Bugs:
  • [Added March 17, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.

  • [Added March 07, 2014]MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
    http://forums.dlink.com/index.php?topic=57050.0

  • [Added Feburary 18, 2014]Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.

  • [Added Feburary 18, 2014]Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
    http://forums.dlink.com/index.php?topic=57991.0

  • [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
    http://forums.dlink.com/index.php?topic=57777.0

  • [Added Feburary 10, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
    http://forums.dlink.com/index.php?topic=56761.0

  • [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0

  • [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.

  • [Added September 14, 2013] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.



FIXED: Thank you D-Link  ;D
FW v1.11B03NA
  • [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0

  • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0

  • [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.

  • [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.

  • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.

    FW v1.10NA
  • [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
     
  • [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.

  • [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
    WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.

  • [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.

  • [Verified September 10, 2013] Improve 5Ghz wireless range.

  • [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.

  • [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.

  • [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.

  • [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.

  • [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0

  • [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #51 on: July 09, 2014, 08:12:36 AM »

Feature Requests:
  • [Added April 17, 2014]
    Port Triggering support. Would help a great deal in multi console homes.

  • [Added March 17, 2014]
    “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
     
    Guest network.  (Gamers also have friends and family visit).
    Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.

    Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November" -10/08/2014 This request is not a feature as the 1st Sunday is actually part of the 2nd week of November.   Thus, not considered an issue by D-Link.

  • [Added February 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.

    I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.

    I would like Playstation 4 support as well as Battlefield 4 support on the ps4."

  • [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Special Applications page.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 06, 2013] IPv6 support.
    Under review and consideration with D-Link at this time.

  • [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
    Under review and consideration with D-Link at this time.

  • [Added August 07, 2013] DLNA certification.
    Under review and consideration with D-Link at this time.
     
  • [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
    Under review and consideration with D-Link at this time.

  • [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
    Under review and consideration with D-Link at this time.
     
  • [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
    Under review and consideration with D-Link at this time.
     
  • [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
    Under review and consideration with D-Link at this time.
     
  • [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
    A feature that maybe incompatible with Streamboost.

  • [Added August 25, 2013] Inline documentation of the 4500.
    Under review and consideration with D-Link at this time.




Bugs:
  • [Added June 25, 2014] Installation of FW and StreamBoost testing seems to be excessive and continual past initial installation of FW. StreamBoost seems to continue speed testing hours and reports of days after initial installation. Speed results do seem more accurate if user give the time to let the router and SB test and settle in. Mine took about 2-3 hours to fully complete with accurate results. A work around FAQ was created to help users correctly install and wait a period of time to ensure that SB completes it's testing with out any interferences from devices. > New DGL-5500 Only Firmware Update Process Over all experiences in installation and performance of SB seems excessive for this version of FW v1.12B05.

  • [Added June 25, 2014] Duplicate device icons are being displayed in the Networking and Priorities list for some devices.
    http://forums.dlink.com/index.php?topic=59817.msg238505#msg238505 and http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506. Related issue>
  • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0

  • [Added June 25, 2014] Connecting a DIR-865L v1.06 on 5Ghz AC bridge mode to the DGL-5500 causes the DGL-5500 to crash. The Power LED turns OFF an the Internet LED turns amber. Prior version of v1.11 B03 worked and did not exhibit this issue.

  • [Added June 25, 2014] Unsaved Changes message is displayed when selecting StreamBoost options and navigating away from these options to a different location when no configurations were made by the user at all. First seen>
  • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.

  • [Added June 25, 2014] IE11 on Windows 7x32, the right side IP addresses for My Networking icons is getting cut off in the display. No matter what I do to zoom in or out or use compatibility mode, the IP address is not displayed fully and no scroll bar is available on a 16x9 LCD monitor. http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506

  • [Added July 1, 2014] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. This issue was seen before, then resolved in FW v1.11B03NA. My router managed to go 9-10days of being online before I could not access the routers web page. http://forums.dlink.com/index.php?topic=55441.0.

    Un-verified Bugs in v1.12 B05: I'll update as I test for these issue in this new build of FW.
  • [Added March 17, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.

  • [Added March 07, 2014]MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
    http://forums.dlink.com/index.php?topic=57050.0

  • [Added Feburary 18, 2014]Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.

  • [Added Feburary 18, 2014]Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
    http://forums.dlink.com/index.php?topic=57991.0

  • [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
    http://forums.dlink.com/index.php?topic=57777.0

  • [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0

  • [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.



FIXED: Thank you D-Link  ;D
FW v1.12B05NA
  • [Verified June 25, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
    http://forums.dlink.com/index.php?topic=56761.0

  • [Verified June 25, 2014] The new drag and drop feature was added to the Priority list. "User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking."

  • [Verified June 25, 2014] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.

  • [Verified June 25, 2014] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0

  • [Verified June 25, 2014] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.

  • [Verified June 25, 2014] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history. > Router logs only hold 9-10 pages before over writing the oldest running information.

  • [Verified June 25, 2014] Improve 5Ghz wireless range.

    FW v1.11B03NA
    • [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0

    • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0

    • [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.

    • [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.

    • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.

      FW v1.10NA
    • [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
       
    • [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.

    • [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
      WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.

    • [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.

    • [Verified September 10, 2013] Improve 5Ghz wireless range.

    • [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.

    • [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.

    • [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.

    • [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.

    • [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0

    • [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
« Last Edit: October 08, 2014, 06:14:26 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #52 on: November 11, 2014, 06:31:06 PM »

Feature Requests:
  • [Added April 17, 2014]
    Port Triggering support. Would help a great deal in multi console homes.

  • [Added March 17, 2014]
    “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
     
    Guest network.  (Gamers also have friends and family visit).
    Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.

    Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November" -10/08/2014 This request is not a feature as the 1st Sunday is actually part of the 2nd week of November.   Thus, not considered an issue by D-Link.

  • [Added February 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.

    I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.

    I would like Playstation 4 support as well as Battlefield 4 support on the ps4."

  • [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Special Applications page.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 06, 2013] IPv6 support.
    Under review and consideration with D-Link at this time.

  • [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
    Under review and consideration with D-Link at this time.

  • [Added August 07, 2013] DLNA certification.
    Under review and consideration with D-Link at this time.
     
  • [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
    Under review and consideration with D-Link at this time.

  • [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
    Under review and consideration with D-Link at this time.
     
  • [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
    Under review and consideration with D-Link at this time.
     
  • [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
    Under review and consideration with D-Link at this time.
     
  • [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
    A feature that maybe incompatible with Streamboost.



Bugs:
  • [Added November 11, 2014] Setup wizard and manual testing of ABE speed test is failing to complete successfully. “Bandwidth Test Failed” message is received.

  • [Added November 11, 2014] Multiple log entries of the following are flooding the router logs:
    (NOTICE): pe_loop: Got delete message   
    (NOTICE): pe_loop: add_msg returned 0.
    Disabling SB stops these entries from happening. Users are noticing that this seems to effect ISP bandwidth service limitations.

  • [Added November 11, 2014] Receive a “413 - Request Entity Too Large” is displayed after logging into the router, making a change and selecting save settings. Users have to soft reboot the router to clear the message and continue to make any changes.

  • [Added June 25, 2014] Installation of FW and StreamBoost testing seems to be excessive and continual past initial installation of FW. StreamBoost seems to continue speed testing hours and reports of days after initial installation. Speed results do seem more accurate if user give the time to let the router and SB test and settle in. Mine took about 2-3 hours to fully complete with accurate results. A work around FAQ was created to help users correctly install and wait a period of time to ensure that SB completes it's testing with out any interferences from devices. > New DGL-5500 Only Firmware Update Process Over all experiences in installation and performance of SB seems excessive for this version of FW v1.12B05.

  • [Added June 25, 2014] Duplicate device icons are being displayed in the Networking and Priorities list for some devices.
    http://forums.dlink.com/index.php?topic=59817.msg238505#msg238505 and http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506. Related issue>
  • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0

  • [Added June 25, 2014] Connecting a DIR-865L v1.06 on 5Ghz AC bridge mode to the DGL-5500 causes the DGL-5500 to crash. The Power LED turns OFF an the Internet LED turns amber. Prior version of v1.11 B03 worked and did not exhibit this issue.

  • [Added June 25, 2014] Unsaved Changes message is displayed when selecting StreamBoost options and navigating away from these options to a different location when no configurations were made by the user at all. First seen>
  • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.

  • [Added June 25, 2014] IE11 on Windows 7x32, the right side IP addresses for My Networking icons is getting cut off in the display. No matter what I do to zoom in or out or use compatibility mode, the IP address is not displayed fully and no scroll bar is available on a 16x9 LCD monitor. http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506

  • [Added July 1, 2014] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. This issue was seen before, then resolved in FW v1.11B03NA. My router managed to go 9-10days of being online before I could not access the routers web page. http://forums.dlink.com/index.php?topic=55441.0.

    Un-verified Bugs in v1.12 B05: I'll update as I test for these issue in this new build of FW.
  • [Added March 17, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.

  • [Added March 07, 2014] MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
    http://forums.dlink.com/index.php?topic=57050.0

  • [Added Feburary 18, 2014] Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.

  • [Added Feburary 18, 2014] Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
    http://forums.dlink.com/index.php?topic=57991.0

  • [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
    http://forums.dlink.com/index.php?topic=57777.0

  • [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0

  • [Added August 14, 2013] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.



FIXED: Thank you D-Link  ;D
FW v1.13B02NA
  • [Added November 11, 2014] Double display of icons are fixed.

  • [Added November 11, 2014] Inline documentation of the 4500.
    Look for the “?” mark in the upper right hand corner of the routers web page.

    FW v1.12B05NA
    • [Verified June 25, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
      http://forums.dlink.com/index.php?topic=56761.0

    • [Verified June 25, 2014] The new drag and drop feature was added to the Priority list. "User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking."

    • [Verified June 25, 2014] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.

    • [Verified June 25, 2014] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0

    • [Verified June 25, 2014] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.

    • [Verified June 25, 2014] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history. > Router logs only hold 9-10 pages before over writing the oldest running information.

    • [Verified June 25, 2014] Improve 5Ghz wireless range.

      FW v1.11B03NA
      • [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0

      • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0

      • [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.

      • [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.

      • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.

        FW v1.10NA
      • [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
         
      • [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.

      • [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
        WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.

      • [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.

      • [Verified September 10, 2013] Improve 5Ghz wireless range.

      • [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.

      • [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.

      • [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.

      • [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.

      • [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0

      • [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #53 on: November 21, 2014, 08:02:05 AM »

Feature Requests:
  • [Added April 17, 2014]
    Port Triggering support. Would help a great deal in multi console homes.

  • [Added March 17, 2014]
    “Make the admin timeout configurable. Particularly annoying to have "save settings" fail, after manually entering a bunch of manual dhcp reservations. Or reduce time required for complicated manual configurations.  Allow a save settings later, rather than so many repeated countdowns.
     
    Guest network.  (Gamers also have friends and family visit).
    Model Series NOTE: Prior DGL series routers did not have a GZ function as this series is mainly a “Gaming” router. GZ features are on most DIR series routers.

    Change daylight savings time default start/end dates to NA typical. Most of the United States and Canada observe DST from the second Sunday in March to the first Sunday in November" -10/08/2014 This request is not a feature as the 1st Sunday is actually part of the 2nd week of November.   Thus, not considered an issue by D-Link.

  • [Added February 09, 2014]'I would like an area where I can see all of the supported applications, what ports they use, and what information is collected for each one in more detail, when the database was last updated.

    I would also like a way to allow users to submit some of this information back to dlink to help improve the frequency of updates.

    I would like Playstation 4 support as well as Battlefield 4 support on the ps4."

  • [Added August 03, 2013] Wireless Status page (Status section). SSID/MAC Address/IP Address/Mode/Rate (Mbps)/Signal (%).   Very helpful in seeing the wireless rate and signal information, but also helpful to see if any unwanted connections are active.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Advanced Wireless Page Additional tweaks, short GI, neighbor protection.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Full Device Info Status page. Super handy page with everything listed. Similar to DGL-4500 under Status/Device Info/Connected LAN Computers.
    Under review and consideration with D-Link at this time.

  • [Added August 03, 2013] Special Applications page.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 06, 2013] IPv6 support.
    Under review and consideration with D-Link at this time.

  • [Added August 06, 2013] Automatically filling in ports when an application is selected. On the 4500 when selected xbox live it would fill in the ports on this one you have to know what ports to open.
    A feature that maybe incompatible with Streamboost.
     
  • [Added August 03, 2013] Advanced Routing Add Route to WAN and LAN like DGL 4500.
    Under review and consideration with D-Link at this time.

  • [Added August 07, 2013] DLNA certification.
    Under review and consideration with D-Link at this time.
     
  • [Added August 07, 2013] NTP Time Services and options. The option of selecting regional NTP servers such as D-Link NTP or a 3rd party NTP server is desired.
    Under review and consideration with D-Link at this time.

  • [Added August 10, 2013] Add router model, HW and FW rev information to the log in page please.
    Under review and consideration with D-Link at this time.
     
  • [Added August 10, 2013] Add StreamBoost update information to D-Links DGL-5500 main web site page for users to get information and notification on when StreamBoost is updated.
    Under review and consideration with D-Link at this time.
     
  • [Added August 14, 2013] DHCP reserved IP addresses of 25 is not enough.  Would like at least 50 DHCP reserved IP addresses.  Even the D-link DIR-655 has 50.
    Under review and consideration with D-Link at this time.
     
  • [Added August 25, 2013] More granular StreamBoost control. In the 4500 I could define a port range to manually override GameFuel's automatic detection; I don't see any similar option here. I'd also love a simple numeric output of QoS level to aid in troubleshooting like isolating and optimizing traffic for a particular game, similar to the 4500.
    A feature that maybe incompatible with Streamboost.


BUGS:
  • [Added November 11, 2014] Setup wizard and manual testing of ABE speed test is failing to complete successfully. “Bandwidth Test Failed” message is received.

  • [Added November 11, 2014] Multiple log entries of the following are flooding the router logs:
    (NOTICE): pe_loop: Got delete message   
    (NOTICE): pe_loop: add_msg returned 0.
    Disabling SB stops these entries from happening. Users are noticing that this seems to effect ISP bandwidth service limitations.

  • [Added November 11, 2014] Receive a “413 - Request Entity Too Large” is displayed after logging into the router, making a change and selecting save settings. Users have to soft reboot the router to clear the message and continue to make any changes.

  • [Added June 25, 2014] Installation of FW and StreamBoost testing seems to be excessive and continual past initial installation of FW. StreamBoost seems to continue speed testing hours and reports of days after initial installation. Speed results do seem more accurate if user give the time to let the router and SB test and settle in. Mine took about 2-3 hours to fully complete with accurate results. A work around FAQ was created to help users correctly install and wait a period of time to ensure that SB completes it's testing with out any interferences from devices. > New DGL-5500 Only Firmware Update Process Over all experiences in installation and performance of SB seems excessive for this version of FW v1.12B05.

  • [Added March 07, 2014] MS Xbox One game consoles are showing Strict NAT when Instant ON feature is enabled on the game console when router is rebooted while game consoles are in sleep mode.
    http://forums.dlink.com/index.php?topic=57050.0

  • [Added Feburary 18, 2014] Users with ISP Speed packages over 100/10 are not getting full speed during speed tests and SB is not completing its speed test run.
    http://forums.dlink.com/index.php?topic=57991.0

  • [Added Feburary 10, 2014] Seeing decreased data speeds on 2.4Ghz when using WPA2 and AES only security settings. Using TPIK results in faster results. Issue has been observed at D-Link and is under review.
    http://forums.dlink.com/index.php?topic=57777.0

  • [Added August 10, 2013] The use of ABE while gaming seems to lower the gaming signal in game and the game status signal on Xbox Live. For example, when ABE is enabled, users may see 3 Yellow signal bars in the games status information while playing the game. If ABE is disabled, users see 4 Green signal bars for the game status information which is preferred. This may effect other gaming platforms as well. Xbox was tested for this report. http://forums.dlink.com/index.php?topic=55119.0





FIXED: Thank you D-Link  ;D
FW v1.13B02NA
  • [Verified November 11, 2014] Double display of icons are fixed.

  • [Verified November 11, 2014] Inline documentation of the 4500.
    Look for the “?” mark in the upper right hand corner of the routers web page.

  • [Verified November 11, 2014] Duplicate device icons are being displayed in the Networking and Priorities list for some devices.
    http://forums.dlink.com/index.php?topic=59817.msg238505#msg238505 and http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506. Related issue>
  • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0

  • [Verified November 11, 2014] Unsaved Changes message is displayed when selecting StreamBoost options and navigating away from these options to a different location when no configurations were made by the user at all. First seen>
  • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.

  • [Verified November 11, 2014] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. This issue was seen before, then resolved in FW v1.11B03NA. My router managed to go 9-10days of being online before I could not access the routers web page. http://forums.dlink.com/index.php?topic=55441.0.

  • [Verified November 11, 2014] After the router reboots and the time runs out on the reboot status page, it takes another 10-15 seconds for a Mac Book Pro wireless to regain the WiFi connection. May effect other device platforms as well.

  • [Verified November 11, 2014] Connecting a DIR-865L v1.06 on 5Ghz AC bridge mode to the DGL-5500 causes the DGL-5500 to crash. The Power LED turns OFF an the Internet LED turns amber. Prior version of v1.11 B03 worked and did not exhibit this issue.

  • [Verified November 11, 2014] IE11 on Windows 7x32, the right side IP addresses for My Networking icons is getting cut off in the display. No matter what I do to zoom in or out or use compatibility mode, the IP address is not displayed fully and no scroll bar is available on a 16x9 LCD monitor. http://forums.dlink.com/index.php?topic=59817.msg238506#msg238506

    Un-verified Bugs in v1.12 B05: I'll update as I test for these issue in this new build of FW.
  • [Verified November 11, 2014] Current FW allows entry of invalid admin password that subsequently fails login authentication. Configuring a 16 character admin password results in subsequent login authentication failures and requires factory restore and reconfiguration to correct and gain access to the router. Device should prevent entry of an admin password that subsequently will not pass login authentication. Note: 16 character passwords worked with 1.01.

  • [Verified November 11, 2014] Selecting Save Settings on the Maintenance/Admin page with out changing anything causes the router to reboot and the pre-set Admin PW to be cleared and set back to being blank.

    FW v1.12B05NA
    • [Verified June 25, 2014] Users are experiencing statistical data disappearing after a few days and nothing being reported after that. A reboot of the router brings back the data however it disappears again. Information passed to D-Link and is currently being worked on.
      http://forums.dlink.com/index.php?topic=56761.0

    • [Verified June 25, 2014] The new drag and drop feature was added to the Priority list. "User Priority manual value input. For instance, let me key in a number next to the device and have it immediately move to that spot in the priority list. At the very least, a move to top button. Any time I turn off stream boost and then re-enable it or restore defaults to apply new firmware, I have to take each device that I want higher in the list and click, up, up, up until I get to the top. This would eliminate a lot of unnecessary clicking."

    • [Verified June 25, 2014] When selecting Statistics, the history of usage when selecting LAST MONTH doesn't show any history from the last month. Only data from the last several minutes.

    • [Verified June 25, 2014] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0

    • [Verified June 25, 2014] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.

    • [Verified June 25, 2014] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history. > Router logs only hold 9-10 pages before over writing the oldest running information.

    • [Verified June 25, 2014] Improve 5Ghz wireless range.



      FW v1.11B03NA
      • [Verified October 25, 2013] Improve StreamBoost operation with ISP modem and services. Down and Up link speeds are reduced when SB or Auto Estimation is enabled. http://forums.dlink.com/index.php?topic=55034.0

      • [Verified October 25, 2013] Incorrect Identification. http://forums.dlink.com/index.php?topic=55334.0 and http://forums.dlink.com/index.php?topic=55477.0

      • [Verified November 6, 2013] DWA-180 and DGL-5500 on 5Ghz Mixed wireless mode only fails to populate PCs and shared folders under Windows 7x64 Network desktop icon. Wired LAN or a bridged DIR-868L work.

      • [Verified October 25, 2013] After disabling ABE, the manual Download and Upload entry boxes are not accurate. I have a 60/5 Mbps connection. I enter 60/5 into those boxes and run a speed test: I get 50/4. I hit "Test Bandwidth" and it gives me results around 70/6. For the hell of it I put 70/6 in those boxes and run a speed test: I get my proper 60/5 Mbps.

      • [Verified November 6, 2013] Unsaved Changes message is displayed when selecting StreamBoost or Filter options and navigating away from these options to a different location when no configurations were made by the user at all.

        FW v1.10NA
      • [Verified September 10, 2013] Larger logs page Very tiny window, DGL 4300/4500 was much longer + wider and easier to read.
         
      • [Verified September 10, 2013] Missing DDNS feature - Reviewed by D-Link. Feature add possibly forth coming.

      • [Verified September 10, 2013]NTFS hard drive support for media streaming. I confirmed that NTFS does work on the DGL-5500.
        WD My Book 2007 2Tb NTFS using Mfr RAID for Space option.

      • [Verified September 10, 2013] Longer router web page timeout before the page auto exits. Would be nice to view the live data tracking and operations before it times out in the web browser. 2min 50sec time out using Mac Book Pro, OSX 10.7.5 using Safari.

      • [Verified September 10, 2013] Improve 5Ghz wireless range.

      • [Verified September 10, 2013] Logs don't seem to hold much if anything specially after DEBUG option is enabled. Logs clear out if router is rebooted. Not leaving any historical log history.

      • [Verified September 10, 2013] Rebooting DSL PPPoE modems and DGL-5500 causes network devices not to appear in My Networks or Priorities. Have to reboot the ISP DSL Modem once again to resolve.

      • [Verified September 10, 2013] In Mac OSX 10.7.5, after disabling ABE and rebooting the DGL-5500 while all devices are online, causes the routers web UI to hang and unable to gain access to the log in page. Tried Opera, FF and Safari and would not access the routers page. However all other internet services were accessible through the router. Router had to be rebooted to get to routers web page.

      • [Verified September 10, 2013] Notice that user experiences and operation of routers web page not as good when using IE, Safari and Opera. Odd behavior is seen when using these web browsers, Save functions don't seem to save correctly or web page loads are not complete, log in page fails to appear correct. Use of FF seems to be the best browser to manage the router. Other browsers should be the same I presume.

      • [Verified September 10, 2013] 500 - Internal Server Error - Seen after several days of being online, no user interaction with the routers web page then attempting to access the routers web page. Internet access is still functional. Unable to access the routers web page. Router must be power cycled. Mac and Windows. http://forums.dlink.com/index.php?topic=55441.0

      • [Verified September 10, 2013] Active Devices in My Network completely empty intermittently. Device icons return after a period of time or logging back into the router later on. http://forums.dlink.com/index.php?topic=55425.0
« Last Edit: November 21, 2014, 08:08:10 AM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: FORUM USER REQUESTS and BUGS
« Reply #54 on: January 07, 2015, 09:20:51 PM »

Feature Request: Respond to WAN ping feature added to Advanced/Firewall page.  This would be useful for Steam servers and tunnelbroker.net IPV6 tunnel keep-alive.   DMZ feature of the DGL-5500 did not forward ICMP either.
Danny
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #55 on: January 08, 2015, 10:24:08 AM »

Link>Welcome!

  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?

Internet Service Provider and Modem Configurations
  • What ISP Service do you have? Cable or DSL?
  • What ISP Modem Mfr. and model # do you have?
  • Is ISP Modem/Service using Dynamic or Static WAN IP addressing?

Thank you for the feed back. We will check the WAN Ping feature. As for DMZ, ICMP responses are not supported at all for DMZ. Questions about this, I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

Feature Request: Respond to WAN ping feature added to Advanced/Firewall page.  This would be useful for Steam servers and tunnelbroker.net IPV6 tunnel keep-alive.   DMZ feature of the DGL-5500 did not forward ICMP either.
Danny
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: FORUM USER REQUESTS and BUGS
« Reply #56 on: January 12, 2015, 04:52:33 PM »

Hardware: DGL-5500A1    There was only 1 version of this router, according to wikidevi.com
Firmware Version :     1.13 , 19, Dec, 2014  ( new upgrade today, not fully tested yet)
Region: Ottawa, Canada
ISP Service: TekSavvy DSL 15/10
ISP Modem: RG505n in bridged mode
VDSL2 uses pppoe with DHCP included for WAN ip
To get a ping reply from the WAN, I currently use an ASUS RT-N10P router between the modem and the DGL-5500 router.
A LAN ssh server would do the trick too, but would be a manual hack in the firewall tables.
Thanks
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #57 on: January 13, 2015, 06:34:30 AM »

So does the 5500 not work right if directly connected to the ISP modem in bridge mode?

Hardware: DGL-5500A1    There was only 1 version of this router, according to wikidevi.com
Firmware Version :     1.13 , 19, Dec, 2014  ( new upgrade today, not fully tested yet)
Region: Ottawa, Canada
ISP Service: TekSavvy DSL 15/10
ISP Modem: RG505n in bridged mode
VDSL2 uses pppoe with DHCP included for WAN ip
To get a ping reply from the WAN, I currently use an ASUS RT-N10P router between the modem and the DGL-5500 router.
A LAN ssh server would do the trick too, but would be a manual hack in the firewall tables.
Thanks
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

murraydr44

  • Level 2 Member
  • **
  • Posts: 25
Re: FORUM USER REQUESTS and BUGS
« Reply #58 on: January 13, 2015, 09:51:20 AM »

From a security perspective, the DGL-5500 works perfectly as the WAN router.  www.grc.com shows a perfect score of no open ports or ping replies showing up.  However, I need at least a ping reply from the WAN router in order to serve up Steam game servers and maintain a Hurricane Electric IPV6 tunnel.  If I use an Asus RT-N10P (updated with Shibby's TomatoUSB firmware), there is a 'Respond to ICMP ping' feature which can be turned on; grc.com shows all ports stealthed (green) and ping replies.   If I use openwrt firmware on the WAN router, from grc.com, I get all ports closed (blue) and pings replies.  Either blue or green grc.com results are okay with me, as long as there are ping replies for Steam and Hurricane Electric's tunnelbroker.net networking features to work.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: FORUM USER REQUESTS and BUGS
« Reply #59 on: January 13, 2015, 03:26:28 PM »

What happens if you put the 5500 into the DMZ on the Asus router?

Have you tried setting up any Virtual Server rules to see if this feature may help with gaming and when the 5500 is the primary host router?

Ya, not sure if WAN ping respond will be added. I'll forward this to D-Link. I'll post if I get some information.

I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this. We find that phone contact has better immediate results over using email.
Let us know how it goes please.

From a security perspective, the DGL-5500 works perfectly as the WAN router.  www.grc.com shows a perfect score of no open ports or ping replies showing up.  However, I need at least a ping reply from the WAN router in order to serve up Steam game servers and maintain a Hurricane Electric IPV6 tunnel.  If I use an Asus RT-N10P (updated with Shibby's TomatoUSB firmware), there is a 'Respond to ICMP ping' feature which can be turned on; grc.com shows all ports stealthed (green) and ping replies.   If I use openwrt firmware on the WAN router, from grc.com, I get all ports closed (blue) and pings replies.  Either blue or green grc.com results are okay with me, as long as there are ping replies for Steam and Hurricane Electric's tunnelbroker.net networking features to work.
« Last Edit: January 13, 2015, 03:52:05 PM by FurryNutz »
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: 1 2 3 [4] 5