• April 16, 2024, 04:49:14 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 0 octets transfer  (Read 2253 times)

yannek

  • Level 1 Member
  • *
  • Posts: 2
0 octets transfer
« on: February 24, 2013, 03:54:45 AM »
Hi

I have a DNS-320+ 1HD of 2gb and I am not an IT expert.
Installation went pretty much fine and I started to transfer files on it.

I started with music and photos, using basic copy paste from windows (vista home edition 32 bits) and it went fine. My computer is on wifi to my ADSL box and my NAS is on LAN onto my box.

Then I wanted to start video transfers and most of the files come are copied to a 0 octets file onto the NAS...Very annoying... >:( It took a while to notice and I have lost a few things (no big deal though)

I've just tried with a software such as Supercopier and it is the same result...
BUT!!! It does work if I use AjaXplorer!!! but I have to transfer video 2 by 2, so it is a bit s*** really...

I have seen a few topic like that on the net without clear solution

Any ideas???

thank you very much in advance
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: 0 octets transfer
« Reply #1 on: February 24, 2013, 09:18:03 AM »
What firmware version is installed on your DNS-320?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

yannek

  • Level 1 Member
  • *
  • Posts: 2
Re: 0 octets transfer
« Reply #2 on: March 03, 2013, 01:02:34 AM »
Hiya

Thanks for helping, sorry I was travelling last week

The firmware is the original one, 2.02
Shall I look for a more recent one??

cheers

Yann
Logged