D-Link Forums

D-Link FAQ => Network Camera FAQs => Topic started by: JavaLawyer on November 26, 2012, 07:09:13 AM

Title: DNR-322L - Password Reset
Post by: JavaLawyer on November 26, 2012, 07:09:13 AM

In you are unable to access your DNR-322L due to a lost or forgotten password, this procedure can be used to set your admin password to the factory default settings. This procedure erase all previously saved settings on your DNR-322L, but will not harm or change the data stored on the DNR-322L.

Procedure

To reset your DNR-322L to the factory defaults, while powered-up, press and hold the "Reset Button" on the rear of the DNR-322L for > 5 seconds until the power LED flashes three times. This procedure will set the following login credentials:

• User name = admin
  
• Password = [BLANK]
  
  

Additional Resources

• Network Cameras - Searchable FAQ Index (http://forums.dlink.com/index.php?topic=58404.0)
  
• Network Cameras - Important Posts & Information (http://forums.dlink.com/index.php?topic=58121.0)