D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-605L => Topic started by: gerchooo on January 28, 2013, 01:33:03 PM

Title: Fimware 1.14
Post by: gerchooo on January 28, 2013, 01:33:03 PM

Where can i find the changelog for firmware version 1.14 :? :)

Title: Re: Fimware 1.14
Post by: FurryNutz on January 28, 2013, 01:39:54 PM

What region are you located?

Title: Re: Fimware 1.14
Post by: FurryNutz on January 28, 2013, 01:44:19 PM

FYI, v1.14 has not be made available or posted officially.

Title: Re: Fimware 1.14
Post by: gerchooo on January 28, 2013, 01:57:55 PM

I am from Bulgaria. I used the build in option of my Dlink DIR605 Router to check for update and it tells me that new version is available :)

Title: Re: Fimware 1.14
Post by: FurryNutz on January 28, 2013, 02:03:21 PM

Is the router working well for you at this time? If it is, I would hold off for now.

However:
Firmware: FW114B01
Hardware: A1
Date: 2012/11/19
Note:
1. FW version is advanced to v1.14
Problems Resolved:
1. Fixed the web compatibility issue of Firefox 10
2. Fixed the compatibility issue of Intel 6300 wireless card.
3. Fixed the compatibility issue of password characters support.
Enhancements:
1. Improved wireless sensitivity of wireless client by enabling 2 beacon mode.
2. Supported IGMP v3 protocol
3. Extend the character number support of email setting to 128.

Unless you are effected by one of the above items, keep whats loaded.

Title: Re: Fimware 1.14
Post by: gerchooo on January 28, 2013, 02:08:35 PM

Thank you very much for the changelog!
I decide to try ver 1.14, but i notice that wireless signal breaks every 2 minutes for just a second witch is very strange and irritating, so i flash back ver 1.13. Now the router is working fine :)

Title: Re: Fimware 1.14 (RESOLVED)
Post by: FurryNutz on January 28, 2013, 02:09:50 PM

One thing about doing FW updates, I recommend doing a Factory Reset before then do one more again after the FW has been updated, then setup the router from scratch and don't load any saved Configuration files.

Glad it's working well for you now.

Enjoy.