Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[ini]

Dear colleagues,
on ftp://ftp2.dlink.com/SECURITY_ADVISEMENTS/DAP-1360/REVF/ you offer a EU firmware.
Please remove it from server.
With it the DAP-1360 Rev.F1 is not usable anymore after upgrade and factory reset. The login screen doesn't appear anymore.
Please forward this information to the responsible colleagues.

Best regards,
Ioannis Nikitopoulos from D-Link Germany.

[FurryNutz]

What browser are you using? Does this happen in IE11, FireFox or Opera as well?
Was a factory reset performed after the upgrade?

Does this version v6.12 of FW work for you?
https://eu.dlink.com/de/de/products/dap-1360-wireless-n-open-source-access-point-router?revision=de_revf#downloads

Dear colleagues,
on ftp://ftp2.dlink.com/SECURITY_ADVISEMENTS/DAP-1360/REVF/ you offer a EU firmware.
Please remove it from server.
With it the DAP-1360 Rev.F1 is not usable anymore after upgrade and factory reset. The login screen doesn't appear anymore.
Please forward this information to the responsible colleagues.

Best regards,
Ioannis Nikitopoulos from D-Link Germany.

[GreenBay42]

Hi Ioannis,
We received this for HQ/Security team to fix a security issue. I will remove the firmware and notify the security team the firmware is not working. Thanks for letting us know.

[ini]

Thanks a lot GreenBay42.
It is away from the DUSA FTP server 

@FurryNutz: It is not an issue because of the used web browser.
Yes, the facrory reset after the firmware upgrade.
A firmware downgrade from 6.13EU is not possible because a login onto the GUI is not possible anymore.
I was already in contact with our team in Taiwan.

Best regards,
Ioannis from D-Link Germany.

[FurryNutz]

Ok, I was making sure about application method. Sounds like it's a hard failure.

Thank you.

[zdjamel]

Dear Ioannis Nikitopoulos

I installed the version "DAP-1360_REVF_FIRMWARE_v6.11B01_WW_BETA"
after I could not use any browser to configure it.
  An emergency solution to remove this version and install another stable one.
thank you in advance

[FurryNutz]

Even after a factory reset you could not access the DAP?

Dear Ioannis Nikitopoulos

I installed the version "DAP-1360_REVF_FIRMWARE_v6.11B01_WW_BETA"
after I could not use any browser to configure it.
  An emergency solution to remove this version and install another stable one.
thank you in advance

[zdjamel]

Hello dear

How  do it??
it try this but no result!!!!
Call Center
   
Pièces jointeslun. 2 mars 15:10 (il y a 19 heures)
   
À moi
Dear Sir,

As per your below email, Kindly try the below

1) Make rest for the device by pressing the reset hole with pin for 30 seconds.

2) Connected to the device through cable then try to open page by type in the URL address
     dlinkap.local./   or  192.168.0.50

3) If it asks you for firmware update you will find it in the attached file.

[FurryNutz]

Please contact your regional D-Link support office by phone and have them help you with this.

[zdjamel]

I do it but no result for this problem

[FurryNutz]

Ask your support office about an RMA.

[zdjamel]

hello
want just know wha is RMA mean???

[FurryNutz]

Return Material Authorization.