Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[alien]

i reset the router for the 3rd time. first by software and then by the hardware button, now its working again. Dlink can you try to reproduce this problem. i Hope that Dlink will fix the worse wireless link in this firmware very soon otherwhise i send it back to dlink and by an Saneo or other product with a good wireless link. even other antennes on the dir655 doesn't help. And let us choose if we want to disable the Good neighbour function.

[CatMan]

Shareport still not working.  Works with my Seagate Free Agent Drive for 1 day.  Then the router needs to be rebooted to connect.  Same problem as before.

[preger]

Loaded today. Lost my settings from 1.32NA. Running OK. Don't have a fancy config with stuff like Shareport tho.

[vulkanbros]

Loaded today from 1.32NA b09....lost my settings....loading my gateway_settings.gws didīnt work either...manually configured...no probs...working fine...and shareport have worked now for 3 hours...the odd thing is, that the throughput to my DAP-1522 (Bridge-mode) has slowed down...from around 5 mbit to 3 mbit (moving large files 3 to 5 GB (movies))
Running WPA, AES.....mixed .11g and .11n..no other fancy stuff.....so far so god

[lynesjc]

My N laptop is now only connecting via G.  What gives?  No changes made to settings by me.

[LenC]

Loaded today from 1.32NA b09....lost my settings....loading my gateway_settings.gws didīnt work either...manually configured...no probs...working fine...and shareport have worked now for 3 hours...the odd thing is, that the throughput to my DAP-1522 (Bridge-mode) has slowed down...from around 5 mbit to 3 mbit (moving large files 3 to 5 GB (movies))
Running WPA, AES.....mixed .11g and .11n..no other fancy stuff.....so far so god

I too was unable to load the gateway_settings.gws after trying the beta code. I received an error message when I tried uploading the saved settings. I was also unable to get one of my Win7 computers to make a wireless connection. When I reloaded the previous verions, everything worked fine.

[bucyouup68]

I was successful in updating the Firmware, but still getting Massive Errors on Wireless, Like 13,000 errors in a Hour.  The Lan side has no errors at all, let the Saga Continue.  This is such a Joke, Once I can Afford to get a new Router I will never buy another Dlink Product again, and Let everyone I know not to buy any of Dlinks products in the Future.  This has gone on way to long without them fixing a KNOWN issue.  Good Luck DLINK, Your CS Sucks.

[MacAl]

Up for over 24 hours yet. The only wireless drops that I have seen thus far have been when my MAC goes into deep sleep mode. When I wake it up, I see the log entry where it logs itself back in. The only other funky thing I have seen thus far is Vonage trying to send a UDP packet that the router blocks. My Vonage phone does work flawlessly so I won't worry about it.

[Ronneske]

Some feedback from NL.
Did flash to the NA beta during the holidays but still the router was rebooting. Had a max uptime of almost one day during the holidays.

Upgraded to the 1.33 beta yesterday. Until now 21 hours+ uptime.

No securespot active. Otherwise a blank router setting so far.
Not yet connected wireless and did not do any p2p yet.

Looking good so far

Using A4 hw.

[zim2dive]

Any release notes on this beta?  Would be nice to know what it changed.

[vulkanbros]

Great stuff.....have been running since the 18th with 1.33b01NA without any kind of problems...and no reboots - unforced or forced

Using wired:
 - 1 Iomega Home Media Storage (to store pics/videos from DCS-1130)
 - 2 high-end gaming computers
Using wireless:
 - 1 laptop with DWA-160
 - 1 DCS-1130 camera
 - 1 DAP-1522 (connected to a Dreambox 800 with HDD)
 - 1 Nintendo Wii

Only minus I have discovered so far is a bit slower transfer rates from/to the connected device on the DAP-1522.....but that is minor in my opinion ... the main thing now is stability...and this FW is the best since 1.21 - for me anyways (btw...I live in Denmark)

[outFire]

This router had running smooth since I updated to beta 1.32beta09. However, I wish dlink can do something about the weak signal on the wireless. Right now, I have a pc equipped with dwa-552 but only connected to dir-655 @62-75 signal. The dir-655 and dwa-552 is only going through one wall (thin wall) and it is only like 10 feet in distance. This dir-655 wireless performance is garbage and I wish I should of not listen thoes stupid blog about how dir-655 is one of the best. It performance worse than the asus rt-n13u which is only half the price and my old dir-625 perform even better than dir-655.

[New2this]

I was running this verion 1.33 and yes it was somewhat stable, but now I have been able to downgrade to Version 1.21.... A4 here

[boogiem0nst3r]

wait

are you saying after you upgraded to 1.33 you could downgrade to 1.21?

[daskino]

yeah can you downgrade now?