D-Link Forums

D-Link Enterprise => DGS-1100-Series => Topic started by: ATXCoder on March 30, 2019, 06:48:39 PM

Title: Getting VLANs to work with multiple routers
Post by: ATXCoder on March 30, 2019, 06:48:39 PM

So I have been going crazy trying to get some VLANs setup for my home network. Here is what my setup looks like:
(https://i.imgur.com/DcIDDLp.png)

I have setup VLANs on pfSense and what is supposed to happen is that when a device in either VLAN_20 or VLAN_50, it will receive a ip address in the respective subnet (pfSense has a DHCP server serving IPs in each VLAN). My issue right now is that it seems like everything is being sent over VLAN_1 which is setup by default on my DGS-1100-05 switch (I'm in North America by the way). How do I setup the D-Link switch so that:

• eth1 is connected to pfSense LAN port (this should carry traffic from all VLANS to and from the D-LINK)
• eth2 is VLAN_20
• eth3 is VLAN_50

Thanks!

Title: Re: Getting VLANs to work with multiple routers
Post by: ATXCoder on March 30, 2019, 10:46:10 PM

I have this 98% working now. Part of the issue was how my specific pfSense appliance does VLANs. I have devices in the VLAN_50 talking to the internet and even my pfSense firewall. The last part is getting them to talk to the D-Link switch. Currently they can browse my pfSense (10.0.0.1) but not my D-Link (10.0.0.2). I have checked my firewall logs and see where VLAN_50 clients were PASSED to 10.0.0.2 so I don't think it is a pfSense/Firewall issue. Anyone have any ideas. Here is my current D-Link VLAN config
(https://i.imgur.com/sYnh1mI.png)