• October 13, 2024, 12:26:24 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 2 3 [4]

Author Topic: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations  (Read 50793 times)

piffmasta

  • Level 1 Member
  • *
  • Posts: 2
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #45 on: September 08, 2017, 07:23:23 AM »

Hi!
I have also problems since upgrade to  v1.10.01... is more instable - the cam hangs at all and only a hard reset help to get it back working.
Since the ping was disabled by firmeware, I had to move on to http request to check if cam is still online. checking it whole day long, the cam is dieing, not every day, but often...

Anyone has also this problem? I think this must be a mem leak in webserver on the cam...
how can  I downgrade to old firmware version? where to download?

thanks, raimund
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #46 on: September 08, 2017, 10:16:41 AM »

Link>Welcome!

  • What region are you located?

What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?
How many other wireless devices do you have connected to the main host router?
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
  • Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?

I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.93 DHCP

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com


Hi!
I have also problems since upgrade to  v1.10.01... is more instable - the cam hangs at all and only a hard reset help to get it back working.
Since the ping was disabled by firmeware, I had to move on to http request to check if cam is still online. checking it whole day long, the cam is dieing, not every day, but often...

Anyone has also this problem? I think this must be a mem leak in webserver on the cam...
how can  I downgrade to old firmware version? where to download?

thanks, raimund
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

ArAge

  • Level 1 Member
  • *
  • Posts: 3
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #47 on: March 05, 2018, 12:07:17 PM »

Hi!

My DCS-935L keeps trying to connect to several outbound ip addresses for example 52.8.86.161, 54.193.41.31, 52.17.177.126, 54.169.242.162, 216.146.43.71. Is there a way to disable this?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #48 on: March 05, 2018, 12:25:11 PM »

Link>Welcome!

  • What region are you located?

What Mfr and model is the main host router?

Use www.domaintools.com whois look up tool to see where those IP addresses are going first:

Of of them points to Amazon:
NetRange:       52.0.0.0 - 52.31.255.255
CIDR:           52.0.0.0/11
NetName:        AT-88-Z
NetHandle:      NET-52-0-0-0-1
Parent:         NET52 (NET-52-0-0-0-0)
NetType:        Direct Allocation
OriginAS:       
Organization:   Amazon Technologies Inc. (AT-88-Z)

Hi!

My DCS-935L keeps trying to connect to several outbound ip addresses for example 52.8.86.161, 54.193.41.31, 52.17.177.126, 54.169.242.162, 216.146.43.71. Is there a way to disable this?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #49 on: March 05, 2018, 01:15:40 PM »

The first two are Amazon in California, the second two are Amazon in Ireland, and the last one is Dynamic Network Services Inc (DYN.com - DDNS service).

The Amazon IPs are most likely for the mydlink services.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #50 on: March 05, 2018, 01:20:08 PM »

Thanks for the info. Figured as much.  ::)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

ArAge

  • Level 1 Member
  • *
  • Posts: 3
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #51 on: March 06, 2018, 01:40:35 PM »

Thanks for the info.

  • What region are you located?
The Netherlands

The first two are Amazon in California, the second two are Amazon in Ireland, and the last one is Dynamic Network Services Inc (DYN.com - DDNS service).

The Amazon IPs are most likely for the mydlink services.


DDNS was already disabled but still outbound connections to 216.146.43.71? That's weird. Any idea why this is happening? How can I disable the mydlink services?

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #52 on: March 06, 2018, 01:53:08 PM »

Are you using or needing Mydlink services at all? If not then you can do a factory reset on the camera and just not set up mydlink features. This should stop all services from being accessed. I would remove the device from the mydlink service site as well.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

ArAge

  • Level 1 Member
  • *
  • Posts: 3
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #53 on: March 09, 2018, 01:04:32 PM »

Hi FurryNutz,

Are you using or needing Mydlink services at all?
No.

If not then you can do a factory reset on the camera and just not set up mydlink features.
Did that.

This should stop all services from being accessed.
No, still the same as you can see here:
Mar  9 21:50:20 debian kernel: [86435.855387] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.254.189.209 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=31446 DF PROTO=TCP SPT=40435 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:50:20 debian kernel: [86436.585960] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=216.146.38.70 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28547 DF PROTO=TCP SPT=40277 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:50:23 debian kernel: [86438.851655] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.254.189.209 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=31447 DF PROTO=TCP SPT=40435 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:50:23 debian kernel: [86439.581671] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=216.146.38.70 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28548 DF PROTO=TCP SPT=40277 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:50:29 debian kernel: [86444.851662] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.254.189.209 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=31448 DF PROTO=TCP SPT=40435 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:50:29 debian kernel: [86445.581980] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=216.146.38.70 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28549 DF PROTO=TCP SPT=40277 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:50:41 debian kernel: [86457.582187] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=216.146.38.70 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28550 DF PROTO=TCP SPT=40277 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:05 debian kernel: [86481.066298] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.229.64.81 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=10744 DF PROTO=TCP SPT=36108 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:05 debian kernel: [86481.581999] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=216.146.38.70 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28551 DF PROTO=TCP SPT=40277 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:08 debian kernel: [86484.062194] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.229.64.81 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=10745 DF PROTO=TCP SPT=36108 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:14 debian kernel: [86490.062106] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.229.64.81 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=10746 DF PROTO=TCP SPT=36108 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:35 debian kernel: [86511.104770] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.194.162.25 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=15102 DF PROTO=TCP SPT=34379 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:38 debian kernel: [86514.102218] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.194.162.25 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=15103 DF PROTO=TCP SPT=34379 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:44 debian kernel: [86520.102245] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=54.194.162.25 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=15104 DF PROTO=TCP SPT=34379 DPT=443 WINDOW=5840 RES=0x00 SYN URGP=0
Mar  9 21:51:53 debian kernel: [86529.582418] loc-net DROP IN=eth1 OUT=eth0 MAC=e8:94:f6:02:6b:08:b0:c5:54:24:f8:02:08:00 SRC=192.168.168.117
DST=216.146.38.70 LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=28552 DF PROTO=TCP SPT=40277 DPT=80 WINDOW=5840 RES=0x00 SYN URGP=0

I would remove the device from the mydlink service site as well.
Did that too.

Do you have any other ideas?
Logged

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #54 on: March 09, 2018, 01:13:59 PM »

mydlink cameras will broadcast to mydlink servers regardless if you sign up for it or not.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: New - DCS-935L - Firmware Version v1.10 B01- Comments & Observations
« Reply #55 on: March 09, 2018, 02:21:13 PM »

Thanks for this info.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: 1 2 3 [4]