D-Link Forums

The Graveyard - Products No Longer Supported => IP Cameras => DCS-2670L => Topic started by: mhieda on October 01, 2018, 10:24:44 AM

Title: DCS-2670L Flick Motion Detection Problem
Post by: mhieda on October 01, 2018, 10:24:44 AM
Hi guys,

I have a problem with the image on my camera. Every time a flick occurs, the motion detector is activated. I submitted a video demonstrating the problem (https://youtu.be/8h0QMCLr_7E).
Does anybody know how to solve this?

Thanks,

Marcos
Title: Re: DCS-2670L Flick Motion Detection Problem
Post by: mhieda on October 02, 2018, 07:40:17 AM
Hi guys,

I found a solution through cgi commands. Acessing the url http://<hostname>cgi-bin/shutter.cgi?min=1/10000&max=1/10000. I can set and fix shutter to manual.
I schedule a google script to change shutter set day and night.

Thanks,

Marcos
Title: Re: DCS-2670L Flick Motion Detection Problem
Post by: mhieda on October 18, 2018, 12:01:10 PM
The problem is not resolved. The issue happened again :-(
Title: Re: DCS-2670L Flick Motion Detection Problem
Post by: FurryNutz on October 18, 2018, 01:34:49 PM
Link>Welcome! (http://forums.dlink.com/index.php?topic=49573.0)


What Mfr and model is the main host router?

If you leave the day and night setting left to day, do you still get the same problem?
Title: Re: DCS-2670L Flick Motion Detection Problem
Post by: mhieda on October 19, 2018, 07:53:29 AM
What Hardware version is your DCS? Look at the sticker behind or under the camera.
Hardware Version A1

Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
Firmware 2.00.02

What region are you located?
Brazil, but I bought the camera in Canada.

What Mfr and model is the main host router?
Sorry, what is mfr? do you mean the brand of my modem internet provider?

If you leave the day and night setting left to day, do you still get the same problem?
If i leave setting to day I have many more alerts due to the image flick.
Title: Re: DCS-2670L Flick Motion Detection Problem
Post by: FurryNutz on October 19, 2018, 08:26:56 AM
Is the FW up to date?
This camera isn't marketed here in the USA so not sure about FW.

If the camera is set for day mode only and your still getting false flickers, then there seems to be a problem with the unit. Not sure if Canada or Brazil will support since your cross regional. I recommend that you phone contact your regional D-Link support office and ask for help and information regarding this.
Link> Tech Support Contact Information (http://forums.dlink.com/index.php?board=635.0)
We find that phone contact has better immediate results over using email.
Let us know how it goes please.
Title: Re: DCS-2670L Flick Motion Detection Problem
Post by: BigKitty10 on December 22, 2018, 03:39:39 PM
Sorry to say that the new firmware does not work with my camera. I tried to update the firmware manually using the file provided. After 180 seconds, the camera resets and IE shows "Page cannot be displayed". I waited through the night, but was unable to access the camera even after 12 hours. (In videos of changing d'link cameras firmware, it took less than 5 minutes). So I unplugged then re plugged the camera and was able to access the webpage, but the firmware is still stuck at 2.00.02.

Here is what is displayed on the Information page

IP Camera Name: DCS-2670L
Time & Date:  Sat Dec 22 16:33:34 2018
Firmware Version:  2.00.02
Hardware Version: A
MAC Address:  B0:C5:54:41:94:A7
IP Address:  192.168.0.22
IP Subnet Mask:  255.255.255.0
Default Gateway:  192.168.0.1
Primary DNS:  192.168.0.1
Secondary DNS:  0.0.0.0
PPPoE:  Disable
DDNS:  Disable
Agent Version: 2.2.0-b25
Title: Re: DCS-2670L Flick Motion Detection Problem
Post by: FurryNutz on December 25, 2018, 02:30:56 PM
Have you contacted Canada D-Link support about this?

v2.00.02 is the most current version of FW.

Sorry to say that the new firmware does not work with my camera. I tried to update the firmware manually using the file provided. After 180 seconds, the camera resets and IE shows "Page cannot be displayed". I waited through the night, but was unable to access the camera even after 12 hours. (In videos of changing d'link cameras firmware, it took less than 5 minutes). So I unplugged then re plugged the camera and was able to access the webpage, but the firmware is still stuck at 2.00.02.

Here is what is displayed on the Information page

IP Camera Name: DCS-2670L
Time & Date:  Sat Dec 22 16:33:34 2018
Firmware Version:  2.00.02
Hardware Version: A
MAC Address:  B0:C5:54:41:94:A7
IP Address:  192.168.0.22
IP Subnet Mask:  255.255.255.0
Default Gateway:  192.168.0.1
Primary DNS:  192.168.0.1
Secondary DNS:  0.0.0.0
PPPoE:  Disable
DDNS:  Disable
Agent Version: 2.2.0-b25