• June 18, 2024, 03:26:36 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: 2630L network connectivity issues  (Read 7321 times)


  • Level 1 Member
  • *
  • Posts: 1
2630L network connectivity issues
« on: June 02, 2018, 10:25:55 AM »

my 2630 comes online with live video after power down & up or factory reset. Within few mins drops off the network (blinking green LED). When it comes online, it only connects to the 2G network of my wifi router. Using IP setting page, tried to change to 5G network, but would not save the changes. It is 2 years after purchase and no warranty. Wifi and camera are within 5 feet. Tried multiple power down/up cycles and factory reset cycles. Also tried to dig around with D-link company tech help over phone. No luck.

Any suggestions or help would be much appreciated.


  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: 2630L network connectivity issues
« Reply #1 on: June 02, 2018, 10:29:46 AM »


  • What Hardware version is your DCS? Look at the sticker behind or under the camera.
  • Link>What Firmware version is currently loaded? Found on the DCSs web page under status.
  • What region are you located?

What Mfr and model is the main host router?
What wireless modes are you using?
What is the distance between the Camera and the main host router?
How many other wireless devices do you have connected to the main host router?
  • Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
  • Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?

I recommend setting a static IP address ON the cameras outside of the main host routers default DHCP IP address pool as a troubleshooting step: 192.168.#.26  DHCP

Test cameras with uPnP and uPnP Port Forwarding both enabled on ALL cameras: DCS Cloud (L) Series Camera Configuration and Mydlink.com
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.