The Graveyard - Products No Longer Supported > DIR-867
Can't post in this forum
KevinA:
DIR-867 HW=A1 FW=1.02 Windows 10 Pro latest OS/BUILD Chrome browser
I was able to post once Webfilter, then I could not post again, I would get page not found errors. I switched back to my old router, DIR-655 and I can post without issues. I can post at other site, just not this one but once....
switched back to DIR-867 and modified this
It appears the ability to post on this forum is intermittent at best.. My cheap OLD DIR-655 works by my NEW DIR-867 can't
FurryNutz:
There ZERO issues with the forum. I post from work and from home from many different devices.
"I was able to post once Webfilter" Huh? I don't understand this.
Are you using any web filters for this forum?
Does this problem happen with a different PC?
Internet Service Provider and Modem Configurations
* What ISP Service do you have? Cable or DSL?
KevinA:
--- Quote from: FurryNutz on December 08, 2018, 03:44:33 PM ---There ZERO issues with the forum. I post from work and from home from many different devices.
"I was able to post once Webfilter" Huh? I don't understand this.
Are you using any web filters for this forum?
Does this problem happen with a different PC?
Internet Service Provider and Modem Configurations
* What ISP Service do you have? Cable or DSL?
--- End quote ---
The first post I did was about Webfilters, I posted a quick post then tried to edit it but every time I hit post I got the error.
I only have one webfilter and it is for yahoo. I have made one reply a few minutes ago with the DIR-867, this post will be my second, and it failed:
This site can’t be reached The connection was reset.
Try:
Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_RESET
I will have to switch back to the DIR-655 to post - this is now from the DIR-655.
FurryNutz:
Try a factory reset as mentioned in the web filter post.
Be sure your PC isn't use any static IP addresses for the PC. Set Auto Obtain IP addressing.
KevinA:
--- Quote from: FurryNutz on December 08, 2018, 05:48:37 PM ---Try a factory reset as mentioned in the web filter post.
Be sure your PC isn't use any static IP addresses for the PC. Set Auto Obtain IP addressing.
--- End quote ---
After a RESET I left everything at default then tried posting and it works. I still have FW 1.02 and now I have to figure out if the DHCP setting caused this, my normal setup is with 10.0.0.0 range for a private network. Or if the Webfilter caused the issue or if something else is going on...
Navigation
[0] Message Index
[#] Next page
Go to full version