• May 22, 2018, 01:40:41 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DNR-322l Setup Problem PLEASE HELP ...  (Read 1182 times)

JanFaber01

  • Level 1 Member
  • *
  • Posts: 2
DNR-322l Setup Problem PLEASE HELP ...
« on: January 27, 2018, 05:24:32 AM »

Hello dear D-Link users,
im sry for my bad english im from Germany.^^

I got a Setup problem for the device DNR 322L.

I bought 1 HDD for the device and i installed it,doing everything right.
So the problem is in the setup wizard it cant find my device.
The L R Lamps are flashing orange the whole time and the standard blue.
Do i need 2 HDD to do the setup or does it not matter ?
My nerves are going to die..PLEASE HELP  :'( :'( :'(
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 44992
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DNR-322l Setup Problem PLEASE HELP ...
« Reply #1 on: January 27, 2018, 12:51:37 PM »

Link>Welcome!

  • What Hardware version is your DN? Look at the sticker behind or under the device.
  • Link>What Firmware version is currently loaded? Found on the DNSs web page under status.

What Mfr and model is the main host router?
Is the DNS getting a Dynamic IP address from the main host router? I recommend using a Static IP address ON the DNR set to 192.168.#.32 or .22.

I would review the user manual for set up help and information:
http://www.dlink.com/de/de/products/dnr-322l-cloud-network-video-recorder?revision=de_revb#downloads

Use IE11 or FF browser to setup and connect with the DNR.

Only one drive should be needed minimum.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting

JanFaber01

  • Level 1 Member
  • *
  • Posts: 2
Re: DNR-322l Setup Problem PLEASE HELP ...
« Reply #2 on: February 04, 2018, 08:46:05 AM »

The Hardware Version is H/W Ver: A2   F/W Ver: 1.40

I dont know the IP Adress from the device and i dont know how to upgrade the firmware.

The main router is a fritzbox 7360

Thanks for you help

I dont know what've to do ...
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 44992
  • D-Link Global Forum Moderator
    • New DIR-890L Router with SmartConnect™ Technology
Re: DNR-322l Setup Problem PLEASE HELP ...
« Reply #3 on: February 04, 2018, 11:03:49 AM »

You can look at your Fritzbox router and look at it's web page for the connected clients list. This should show you what devices are connected and what IP addresses they are being given.
Logged
Cable:200mb/10Mb>Motorola MB7420>COVR3902>HP 24pt Gb Switch. 3xDGL-4500s,DIR-857,835,827,815,890L,880L,868L,865L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L and 960L.
Go Here>Router Troubleshooting