D-Link Wireless Adapters > DWA-192

DWA 192 lose connection with Windows 10

(1/5) > >>

Viktor:
I'm having an issue with my new DWA 192 since the beginning, after some times working (no more than 2 hours) it drops the signal, the blue light start blinking and unfortunately it doesn't recover automatically. I need to switch wifi off and switch it on again in order to get it connected to the router.

I've a desktop PC with Windows 10 Pro and have tried the Cortana trick switching off the location as suggested in another post on this forum, whitout any significant change. Driver installed are 1030.6.1201.2015, taken from your D-link website. It's connected to USB 3.0 port and I've tried other USB 3.0 ports, without changes. I've a Technicolor fiber router from Telecom Italia and an access point Asus EA-N66. The DWA is connected at 5Ghz (at least when it stays on). The problem happens whether if I connect to the router directly or to the access point.

Could you please advise on how to fix this really boring problem? Unfortunately my return windows is over and I can't take it back to the retailer shop where I've bought it.

Thanks

FurryNutz:

* What wireless modes are you using?
* Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
* Any other WiFi routers in the area that maybe causing interferences? Link> Use a WiFi Scanner to find out. How many?
Can you test with a Windows 7 PC by chance?

Viktor:
Hi!

It's on "Auto" in the device advanced config and inSSIDer tells that it's connected to the AP (Asus EA N-66) in "n" mode.
No Channels overlapping with other wi-fi devices and no cordless.

Unfortunately I've no win 7 pc to use.

Consider that it doesn't drop immediately, usually it takes around 90 mins.

Thanks


FurryNutz:
Does the drop time seem consistent or is the time random?

Viktor:
It seems to be consistent.

Navigation

[0] Message Index

[#] Next page