The Graveyard - Products No Longer Supported > DIR-600M

only 10mbps works in DIR 600m

(1/3) > >>

avatarsabbir:
dear sir
only 10mbps works in my  DIR 600m ...whenever i select 100mbps or 10/100mbps it shows there is internet connection but no page opens....said error time out...please help...i already changed my dlink router frm thr reseller but the problem remains same

FurryNutz:
Link>Welcome!


* What Hardware version is your router? Look at sticker under the router case.
* Link>What Firmware version is currently loaded? Found on the routers web page under status.
* What region are you located?
Internet Service Provider and Modem Configurations

* What ISP Service do you have? Cable or DSL?
* What ISP Modem Mfr. and model # do you have?
Check to see what your ISP modem supports on this WAN port. Some older modems only supported 10Mb. Newer modems usually support 100Mb at minimum and latest modems support 1000Mb.


* Check cable between Modem and Router, swap out to be sure. Link> Cat6 is recommended.

avatarsabbir:
my router version is 3.01 version c
and um connected with a 100mbps networl ....

avatarsabbir:
um connected with cable and my ip is static ip

FurryNutz:
What happens if you use Auto for the WAN port speed?

Check to see what your ISP modem/service supports on this WAN port. Some older modems only supported 10Mb. Newer modems usually support 100Mb at minimum and latest modems support 1000Mb.

If the ISP services support 100Mb connections then there maybe and issue with this router.

Navigation

[0] Message Index

[#] Next page