D-Link FAQ > Network Camera FAQs

DCS Network Cameras - URL Command Lines Forum Member Feedback

(1/3) > >>

JavaLawyer:
This is the companion thread to the URL Command List post in the D-Link FAQ forum, which lists known D-Link network camera URL commands:

[*]DCS Network Cameras - URL Command List

[/list]

The URL command lines presented in the DCS Network Cameras - URL Command List post were assembled from forum member input and third party sources. If any of the URLs in that post are non-functional or you would like to contribute additional URL commands for specific actively sold D-Link network cameras, please post your findings as a reply to this thread.

Thanks in advanced for your contribution!  :)

ReverendTed:
Do you think it would be helpful or confusing to indicate that you can specify the port number as well:
http://IPADDRESS:PORTNUMBER/etc/etc.etc

JavaLawyer:

--- Quote from: ReverendTed on April 30, 2014, 11:44:01 AM ---Do you think it would be helpful or confusing to indicate that you can specify the port number as well:
http://IPADDRESS:PORTNUMBER/etc/etc.etc

--- End quote ---

Good suggestion. . . Looks like a global copy/replace is in order.  ;)

beatus:
Using this URL command to my DCS-2332L (which works as webcam) I need to enter user-id and password.
Unfortunately I did'nt find a working syntax (actually I tried htttp://mywebcam.com/image/jpeg.cgi) without theI'm looking for the correct syntax with direct link to the jpg of my 2332 without any additional entries.
any ideas?

nullit:
Hi,
 
Thought I'd let you know that several of the commands listed don't seem to work on my DCS-930Ls. Here they are :
 
Non-functional (FF33: "Error: File Not Found", IE11: "- webpage cannot be found")
DCS-930L - http://IPADDRESS:PORT_NUMBER/jpg/image.jpg?size=3
DCS-930L - http://IPADDRESS:PORT_NUMBER//snapshot.jpg?user=[USERNAME]&pwd=[PASSWORD]&strm=[CHANNEL]
DCS-930L - http://IPADDRESS:PORT_NUMBER/videostream.cgi?rate=0&user=[USERNAME]&pwd=[PASSWORD]
 
Non-functional (Cannot change resolution, is pre-determined by cam setting)
DCS-930L - http://IPADDRESS:PORT_NUMBER/video.cgi?resolution=[WIDTH]x[HEIGHT]
DCS-930L - http://IPADDRESS:PORT_NUMBER/video.cgi?resolution=VGA
 
Non-functional (Prompts for USERNAME and PASSWORD  despite embedded in command)
DCS-930L - http://IPADDRESS:PORT_NUMBER/mjpeg.cgi?user=[USERNAME]&password=[PASSWORD]&channel=[CHANNEL]
 
Cams prompt for Username and Password for remaining six commands.
 
..... Cheers

PS.: Don't like much the new forum layout format and color scheme !
 

Navigation

[0] Message Index

[#] Next page