Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[rastacongo]

Hello,
I've got a device which the manufacturer suggests:

Usually, no port configuration is really necessary. You just have to make sure that all UDP ports above 1024 are not being blocked.
If it still doesn’t work, please create additionally a port forwarding for the ports 9573 & 3478, both UDP.

How can I do that on my 655?

[FurryNutz]

Link>Welcome!

• What Hardware version is your router? Look at sticker under the router case.
• Link>What Firmware version is currently loaded? Found on the routers web page under status.
• What region are you located?

Internet Service Provider and Modem Configurations

• What ISP Service do you have? Cable or DSL?
• What ISP Modem Mfr. and model # do you have?

Possibly needed...What is this device?

[rastacongo]

My router is DIR-655 A3 and firmware version 1.36WW
Im located in Cyprus (Greek Island) and my ISP is Primetel
My ISP's modem is the Telsey CPVA624


I have no access to the ISP modem though

[FurryNutz]

Can you tell if the modem is a stand alone modem or does it have a built in router by chance?

[rastacongo]

I think it has built in router. I have to mention that if I connect that device on my ISP's modem that has all ports open on LAN1 the device connects to the manufacturer's portal. Behind my router, not.

[FurryNutz]

Might see if you can put the 655 in to the Modems DMZ and try again. You have a double NAT condition which isn't recommended.