• April 16, 2024, 06:48:29 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: What happend?  (Read 6360 times)

Giisen

  • Level 1 Member
  • *
  • Posts: 7
What happend?
« on: January 01, 2010, 01:33:25 AM »
Just got the dns 323 a week ago, firmware 1.07 preinstalled. Two WD green 1,5 TB standard installation.
BT installed. Drives are mapped X and Y both on my xp and vista pc:s.
On the X drive I placed all my media och on Z my backup.

Now all of a sudden Z is gone and my backup folders are placed on X....and all my media is gone!

WTF....is this? Tried a factory reset....no luck. Can't map Z in ESU but in config both drives show.

Any ideas?
Logged

gunrunnerjohn

  • Level 11 Member
  • *
  • Posts: 2717
Re: What happend?
« Reply #1 on: January 01, 2010, 06:47:33 AM »
Are you sure it isn't as simple as a failure of the second drive?  Best to take them out and test them using a standard PC.  I use the disk manufacturer's diagnostic.
Logged
Microsoft MVP - Windows Desktop Experience
Remember: Data you don't have two copies of is data you don't care about!
PS: RAID of any level is NOT a second copy.

Giisen

  • Level 1 Member
  • *
  • Posts: 7
Re: What happend?
« Reply #2 on: January 01, 2010, 08:47:03 AM »
That was my first guess too. But that is not the case.
Somehow the two drives has changed labels. X is now Y and Y is X.

After alot of hassle I managed på chang it back and mapp my two drives again. Just hoping it stays this way now. I don't understand why or how it happend, I wasn't doing anything, just listening to music, thats it!

Another question, how do I uninstall BT running firmware 1.07?

Oh, and if I upgrade to 1.08 do my settings get reset?

Please, Dlink make it possible to share more than ONE folder (not root) via FTP!
Logged

gunrunnerjohn

  • Level 11 Member
  • *
  • Posts: 2717
Re: What happend?
« Reply #3 on: January 01, 2010, 08:57:21 AM »
Quote
Another question, how do I uninstall BT running firmware 1.07?
Go to the applications section and select the Stop button.  Then you can remove it.

Whenever you upgrade firmware, you should  reset to factory defaults and reconfigure.  Sometimes the new firmware has different mappings for configuration data.
Logged
Microsoft MVP - Windows Desktop Experience
Remember: Data you don't have two copies of is data you don't care about!
PS: RAID of any level is NOT a second copy.

Giisen

  • Level 1 Member
  • *
  • Posts: 7
Re: What happend?
« Reply #4 on: January 01, 2010, 09:13:24 AM »
Quote from: gunrunnerjohn on January 01, 2010, 08:57:21 AM
Go to the applications section and select the Stop button.  Then you can remove it.

Hmm....cant seem på find the applications section. Are you sure this feature is available in 1.07?  ???

Btw thanks for taking your time!
Logged

gunrunnerjohn

  • Level 11 Member
  • *
  • Posts: 2717
Re: What happend?
« Reply #5 on: January 01, 2010, 09:34:27 AM »
When you come to the login screen, there is a Configuration and Applications button.  Pick the Applications button.
Logged
Microsoft MVP - Windows Desktop Experience
Remember: Data you don't have two copies of is data you don't care about!
PS: RAID of any level is NOT a second copy.

Giisen

  • Level 1 Member
  • *
  • Posts: 7
Re: What happend?
« Reply #6 on: January 01, 2010, 09:38:25 AM »
Quote from: gunrunnerjohn on January 01, 2010, 09:34:27 AM
When you come to the login screen, there is a Configuration and Applications button.  Pick the Applications button.


Dont have application button only Configuration and Downloads, thats it.
Logged

gunrunnerjohn

  • Level 11 Member
  • *
  • Posts: 2717
Re: What happend?
« Reply #7 on: January 01, 2010, 09:48:45 AM »
I never used this on 1.07, must have changed for 1.08.
Logged
Microsoft MVP - Windows Desktop Experience
Remember: Data you don't have two copies of is data you don't care about!
PS: RAID of any level is NOT a second copy.

Giisen

  • Level 1 Member
  • *
  • Posts: 7
Re: What happend?
« Reply #8 on: January 01, 2010, 09:54:15 AM »
Then I simple need to upgrade!  :)
Logged

rcblackwell

  • Level 2 Member
  • **
  • Posts: 48
Re: What happend?
« Reply #9 on: January 01, 2010, 09:55:00 AM »
Quote from: gunrunnerjohn on January 01, 2010, 09:48:45 AM
I never used this on 1.07, must have changed for 1.08.

It did. 1.07 doesn't have this feature. According to D-Link support BT is not removable from this or earlier FW versions.
Logged
Bob Blackwell
Pickering, ON

AFTICARR.COM

Giisen

  • Level 1 Member
  • *
  • Posts: 7
Re: What happend?
« Reply #10 on: January 01, 2010, 10:12:28 AM »
Thank you both for your time and effort!
Logged

gunrunnerjohn

  • Level 11 Member
  • *
  • Posts: 2717
Re: What happend?
« Reply #11 on: January 01, 2010, 11:02:09 AM »
When you upgrade, be sure to reset to factory defaults and reconfigure.  Your data will not be affected.
Logged
Microsoft MVP - Windows Desktop Experience
Remember: Data you don't have two copies of is data you don't care about!
PS: RAID of any level is NOT a second copy.

fredrokk

  • Level 1 Member
  • *
  • Posts: 16
Re: What happend?
« Reply #12 on: January 02, 2010, 04:26:14 AM »
Couldn't he just delete the bt-files in he apps-folder and restart? I tried to disable bt in 1.8, but it kept on accessing my drive hinder it to go to sleep. I had to manually delete the files to make it stop. could it be that the bt installed in 1.7 is still running when installing as an app in 1.8?
Logged

gunrunnerjohn

  • Level 11 Member
  • *
  • Posts: 2717
Re: What happend?
« Reply #13 on: January 02, 2010, 06:16:45 AM »
Since there are hooks to actually run the BT client, it's not a good idea to simply delete the files.
Logged
Microsoft MVP - Windows Desktop Experience
Remember: Data you don't have two copies of is data you don't care about!
PS: RAID of any level is NOT a second copy.