Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Johnny425]

Hi guys,

I'm probably in the wrong area to post this question. But I was wondering I'm in Australia, NSW and I have screenshot my settings and just wondering if they are correct.

well I can't seem to add picture so i'll have to type it :/

Enable Wireless : (checked)

AP Isolate : (unchecked)

SSID : Potter05 2.4ghz

Visibility Status : (Visible checked)

Country : Australia

802.11 Mode : Mixed 802.11b/g/n

Band Width :20/40M

Wireless Channel : Ch08

WPA Mode : Personal

Encryption Mode : AES

Group Key Update Interval: 100

[FurryNutz]

Link>Welcome!

• What Hardware version is your modem? Look at the sticker under modem.
• Link>What Firmware version is currently loaded? Found on the modems web page under status.

Wireless Configurations
Links>Wireless Installation Considerations and Managing Signal Congestion and Good Neighbour Policy

• Ensure the default (dlink) SSID name is changed. Ensure that different SSID names are used between each WiFi 2.4/5Ghz radios. Can be anything and not something that's already in use by any neighbouring WiFi routers. Under Setup/Wireless/Manual.
• What wireless modes are you using?
• 2.4Ghz Routers only: Try single mode G or N or mixed G and N?
• Try setting a manual Channel to a open or unused channel. 1, 6 or 11. 11 for single mode N if the channel is clear. 13 for EU regions.
• What security mode are you using? Preferred security is WPA-Personal. WPA2/AES Only. Some WiFi adapters don't support AES, so you might want to try TPIK only or Auto TPIK and AES.
• Any 2.4Ghz or 5Ghz cordless house phones or WiFi APs near by that maybe causing interferences?
• Any other WiFi routers in the area that maybe causing interferences? Link> Use InSSIDer to find out. How many? Use v3, its free.

Router Placement
Forum User - "Well I feel really dumb. After moving the router away from other electronic devices my speeds are back to normal. Just a heads up for anyone experiencing slow speeds, you might want to move it away from other electronics and see if that helps."
3-6' feet minimum safe distance between devices.
Placement on main level floor and central in the building and WELL ventilated is preferred. Not in basements or closets as building materials, or near by electronics devices could interfere or hinder good signal propagation.
http://www.smallnetbuilder.com/wireless/wireless-basics/31083-smallnetbuilders-wireless-faq-the-essentials