D-Link DSL Modem/Routers > Other DSL modem/routers

Port Forwarding DSL-3782

(1/1)

neoscout:
Hello,

I'm having difficulties opening a port on this router. IDK why but on every other router that I've used it was a simple thing of pointing the port towards internal ip and you're done, but not here.

So the model i have is DSL-3782 and here is what i've done:

In the DHCP Table i've reserved an IP 192.168.1.3 for my PC.
pic:
https://imgur.com/OTYQRf5

After, added the port in "Application" section:

https://imgur.com/fFCnjTe

Also went into "Port Forwarding" and added this:

https://imgur.com/fnylvcO



BUT its still closed, why? I even added a rule in my Windows Firewall to let 22005 through..
https://imgur.com/sTxazMF


I seriously don't understand what's the problem, I've even restored factory defaults, restarted router, idk whats going on, I dont have anything else inbetween this router/modem and PC, straight ethernet cable, nothing else.

Anybody have any suggestions?

GreenBay42:
Remove the entry in Applications. You shouldn't have the same port in applications and port forwarding.

To test, under port forwarding, enable DMZ to your PC and see if it works. If not, then something else is going on.

If you are trying to play GTA5 (I assumed by the name of your rule), you should not have to open any ports unless you disabled UPnP. Check under Settings > Network. If UPnP is enabled, you should be able to remove all your rules under "applications".

Also they list more ports that need to be opened - https://support.rockstargames.com/articles/200525767/GTA-Online-PC-Connection-Troubleshooting

Navigation

[0] Message Index