D-Link Forums
D-Link Enterprise => DGS-1210-Series => Topic started by: patl on December 07, 2018, 12:54:14 AM
-
hello,
i want to route to vlans through my dlink switch with L3 features
my conf :
VLAN10 : 192.168.1.0/24 (Gw dlink ip 192.168.1.250)
VLAN30 : 192.168.0.0/24 (Gw dlink ip 192.168.0.250)
ex port 5 : in vlan10 + PVID 10
ex port 13 : vlan30 + PVID30
from port 5 (vlan10) i can ping the dlink gateway in the vlan 30 (192.168.0.250), but i can't ping the endpoints in the vlan30
from the switch : i can ping all devices
from devices in vlan30 i can ping dlink GW (both side)
i have an ACL that allow all traffic for all ports
with debug info command, i can see mac and arp that are ok
when i do a tcpdump, i can see the icmp packet on the original VLAN and not routed on the destination VLAN
can you help me ?
thanks
-
in complement :
Firmware Version 7.11.b08
Hardware Version G1