The Graveyard - Products No Longer Supported > DIR-600L

DIR-600L - How to Enable Traffic Control

(1/1)

FurryNutz:
By default, Traffic Control is disabled as Automatic Bandwidth Control is enabled an thus disables manual Traffic Control Settings.

To enable Traffic Control manual input settings, do the following:
1. Navigate to Manual on the routers initial web page.
2. Navigate to Advanced/Traffic Control.
3. Select the check box next to Enable Traffic Control.
4. Select the check box next to Automatic Distribute Bandwidth and remove the check mark.
5. Save settings.

This should enable the custom input rules at the bottom. Adjust them for your network needs.

Navigation

[0] Message Index