• April 16, 2024, 06:56:44 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DAP-3662 Rev A1/A2 v2.00RC095 Official Firmware Release  (Read 5997 times)

GreenBay42

  • Administrator
  • Level 11 Member
  • *
  • Posts: 2752
DAP-3662 Rev A1/A2 v2.00RC095 Official Firmware Release
« on: December 03, 2019, 07:15:30 AM »
Firmware v2.00 for the DAP-3662 (rev Ax) has been released. This version will allow you to use this access point with Nuclias Connect.

Note is will remove support for Central WiFi Manager software.  USA customers do not update yet if using CWM. Nuclias Connect will be released in the US early 2020.

Firmware Download -- ftp://FTP2.DLINK.COM/PRODUCTS/DAP-3662/REVA/DAP-3662_REVA_FIRMWARE_v2.00RC095.zip

Release Notes:
1. Use QCA's WDS
2. Remove AP Array
3. Support Nuclias Connect
4. Support DDPv5/APP
5. In default settings, the network IP address setting is Dynamic IP
6. Support MDNS
7. Modify Time zone settings
8. Update country selection table
9. Move IP filter settings page from Captive Portal to Filter folder, behind WLAN Partition (AP GUI). IP filter function is independent feature and can work with all non-captive portal attenuation
10. Default admin user name/password is admin/admin
11. Add setup Wizard when first login
Logged