D-Link Forums
D-Link DSL Modem/Routers => Other DSL modem/routers => Topic started by: PCdoc on November 13, 2012, 10:51:37 PM
-
Hi,
I have a DSL-2520U LAN/USB combo modem with H/W version T1. When I use irc messengers like xchat, there are some servers on which by default the a user's hostmask is his IP clearly shown there. And if I post on some websites or forums, MY IP is recorded there. I tried pointing my browser to my IP and the modem's configuration page opens.
One of the mates on the irc private msges me and told me that my IP opens the DSL config page. How do I setup my modem so that any one from the internet if opens my IP, is not redirected to my config page but either opens nothing "Page not found" or its like blocked.
Thanks
-
Seems like this could be a configuration of the router possibly or a bug in FW.
I would review the user manual and see if maybe this could be an option that can be turned off. Look for something call Remote Access. Usually on DIR series routers this is a check mark option that has to be enabled and after it is, anyone with the public WAN side IP address and port number can access the routers web page. I don't know if this is the same with DSL series modems. I believe it should be hidden from the public WAN access unless this options is enabled.
I would phone contact DLink support for your region, say level 2 or 3 and inquire about this.
-
For my region, if i click any support link like online chat, the page returns internal server error. Thats why i posted on the forums.
This modem doesnt have anything called Remote Access
-
What region are you located?
-
India (Asia)
-
http://www.dlink.co.in/support/ (http://www.dlink.co.in/support/)
To Contact D-Link Tech Support by phone, please call:
Toll Free - 1800-22-8998
GSM/CDMA USER- +91-22-27626600 (Local & STD Charges apply)
Email - helpdesk@dlink.co.in
Get into level 2 or 3 support.
-
PCdoc,
Just curious - іs menu looks like this?
http://ftp.dlink.ru/pub/ADSL/DSL-2520U/Description/DSL-2520U_Manual_EN.pdf
On the Advanced / Remote accesspage, you can configure remote access to the web-based
interface of the router. By default, the access from external networks to the router is closed. If you
need to allow access to the router from the external network, create relevant rules.
Page 46
If you cant turn off your wan port access - block external port № 80 in firewall menu.
H/W, F/W...regions, ftp mess...
Curiosity diversity kills :D
-
PCdoc,
Just curious - іs menu looks like this?
http://ftp.dlink.ru/pub/ADSL/DSL-2520U/Description/DSL-2520U_Manual_EN.pdfIf you cant turn off your wan port access - block external port № 80 in firewall menu.
H/W, F/W...regions, ftp mess...
Curiosity diversity kills :D
The menu does not look like the one in the pdf. The menu in the pdf is Bluish but the menu of my router is orange-ish.
I tried disabling WAN and LAN in front of HTTP in Access Control menu under management, This then now disabled my local access also from 192.168.1.1 :(
I want to enable this now without having to reset the router :-s
-
I tried disabling WAN and LAN in front of HTTP in Access Control menu under management, This then now disabled my local access also from 192.168.1.1 :(
I want to enable this now without having to reset the router :-s
There was no need to disable local(lan) access :-\
If your telnet access is still working
1. connect to router
for windows: Press win+R write command or cmd, press enter.
for mac / Linux: run terminal
write telnet 192.168.1.1
2. Enter login, press enter, enter password press enter.
3. Write help and press enter (press enter for all commands)
4. There should be a command like: dumpcfg and remoteaccess
5. Write dumpcfg
Then copy all text from console after this command - same text you receive if backup from web interface.
Save text as router.cfg
6. Write remoteaccess
remoteaccess <enable|disable> [--service <servicename>]
remoteaccess show [--service <servicename>]
7. Write remoteaccess show
there should be a string like
remote access for HTTP is disabled
8. Wtrite remoteaccess enable --service HTTP
9. Write remoteaccess show
remote access for HTTP is enable
10. Open your web browser and go to http://192.168.1.1 (http://192.168.1.1) ;)
Then Access Control menu: enable all LAN and disable all WAN services
Іf you still cant access you router through web:
Reset the router.
Upload your router.cfg
Go to access page enable web access or edit router.cfg before upload ( should be text like http="disable", replace with http="enable" or http="lan").
Apply settings.
The menu does not look like the one in the pdf. The menu in the pdf is Bluish but the menu of my router is orange-ish.
I do not even really surprised :)
Also is a know there several different 'orange' web interfaces.
http://support.dlink.com/Emulators/dsl520B/310/index.htm (http://support.dlink.com/Emulators/dsl520B/310/index.htm)
http://support.dlink.com/Emulators/dir330/112/index.html (http://support.dlink.com/Emulators/dir330/112/index.html)
Then do as FurryNutz said
http://forums.dlink.com/index.php?topic=51180.msg190837#msg190837 (http://forums.dlink.com/index.php?topic=51180.msg190837#msg190837)
Good luck ;)
-
Let us know if you can get it working. As a suggestion, Maybe someone can review your router settings with you using Link> teamviewer (http://www.teamviewer.com) if your interested. Its safe and secure.
-
I do not even really surprised :)
Also is a know there several different 'orange' web interfaces.
http://support.dlink.com/Emulators/dsl520B/310/index.htm (http://support.dlink.com/Emulators/dsl520B/310/index.htm)
http://support.dlink.com/Emulators/dir330/112/index.html (http://support.dlink.com/Emulators/dir330/112/index.html)
Then do as FurryNutz said
http://forums.dlink.com/index.php?topic=51180.msg190837#msg190837 (http://forums.dlink.com/index.php?topic=51180.msg190837#msg190837)
I have done a reset and i had a setting backup file so i used it to restore configs.
my router page looks almost like this one: http://support.dlink.com/Emulators/dsl520B/310/index.htm (http://support.dlink.com/Emulators/dsl520B/310/index.htm) and only one option in here is extra i.e. under management>> TR-069. Only this option appears new rest all options are almost same like my router has.
The router I have is this one : http://www.dlink.co.in/products/?pid=438 (http://www.dlink.co.in/products/?pid=438)
-
I don't see much there that might effect changes on how the modem UI is accessed via the web. I'm wondering if this is ON always by design.
I would recommend that you phone contact your regional DLink support office, level 2 or higher and inquire about this.
Let us know what they say.