• March 28, 2024, 04:01:52 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Can't save new DHCP reservation in my DIR-615 -- My browser gets frozen (CPU u  (Read 3187 times)

Yurym

  • Level 1 Member
  • *
  • Posts: 5

I have DIR-615  Hardware Version: E1     Firmware Version: 5.01NA
I already created "DHCP reservation list" with 13 IP addresses at http://192.168.0.1/lan.asp (Setup >> Network Settings >> Add/Edit DHCP Reservation).

However I can't add additional reservations.
My browser gets frozen (CPU utilization = 25% and memory is steadily growing in Task Manager) and there is "192.168.0.1 is not responding due to a long-running script" error message in a browser window.

Similar behavior The same error was reproduced in 32bit and 64 bit IE9 and the latest version of Chrome.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Link>Welcome!

  • What region are you located?
  • Are you wired or wireless connected to the router?
  • Has a Factory Reset been performed?
  • Was a Factory Reset performed before and after any firmware updates then set up from scratch?
FW Update Process
  • Was the router working before any firmware updates?

PC 3rd Party Security Software Configurations
  • Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic.
  • Turn off all devices accept for one wired LAN PC while testing.
  • Disable any downloading client software managers, i.e. Torrents or similar.


PC Web Browser Configurations
What browser are you using?
Try FF? If IE 8, 9, 10 or 11, set compatibility mode and test again.
Disable any security browser Add-ons like No Script and Ad-Block or configure them to allow All Pages when connected to the router.
Clear all browser caches.
Be sure to log into the Admin account on the router.
Try turning off these features in Chrome:
Top right corner, little bars for options > Settings > Settings (on left) > Show advanced settings.
Uncheck these:
Use a web service to help resolve navigation errors
Use a prediction service to help complete searches and URLs typed in the address bar
Predict network actions to improve page load performance
Enable phishing and malware protection
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting

Any status on this?

I have DIR-615  Hardware Version: E1     Firmware Version: 5.01NA
I already created "DHCP reservation list" with 13 IP addresses at http://192.168.0.1/lan.asp (Setup >> Network Settings >> Add/Edit DHCP Reservation).

However I can't add additional reservations.
My browser gets frozen (CPU utilization = 25% and memory is steadily growing in Task Manager) and there is "192.168.0.1 is not responding due to a long-running script" error message in a browser window.

Similar behavior The same error was reproduced in 32bit and 64 bit IE9 and the latest version of Chrome.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.