D-Link Forums
D-Link Enterprise => DGS-1210-Series => Topic started by: gmac on June 19, 2018, 02:01:16 PM
-
Hi!
I have two DGS-1210-52 switch connected with LACP. If I'm going to buy a third (DGS-1210-52P) switch. How should I connect the other two?
This "shema" is correct?
(http://users.atw.hu/suni/dl/lacp.png)
Thanks!
-
How about:
...Swi|tch 1 Switch 2 Switch 3 Swi|tch 1...
| p42 =LACP= p40 p42 =LACP= p40 p42 =LACP= p40 |
| p43 =LACP= p41 p43 =LACP= p41 p43 =LACP= p41 |
Plus RSTP...
Its what I had thought of doing between my leaf switches (only have a single DGS-1210 as my core switch)... except the (other)-Link switches don't do STP...and only static LAG.
Strange that on my DGS-1210, I had to enable LBD, in order to disable it on the ports, before I could setup the LAGs The leaf switches have an LBD feature, but no per port configuration...and its only port based.
LK
-
is it possible to tag Vlan on a lacp trunk ?