The Graveyard - Products No Longer Supported > DCS-932L

DCS-932L - Firmware Wishlist

<< < (60/60)

JavaLawyer:
This wishlist contains firmware suggestions provided by the forum community and may not reflect actual changes to current or future D-Link firmware releases. Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in blue.

DCS-932L Wishlist

[*]General - Ability to upload to web/cloud storage (e.g. Amazon S3, Windows Azure, SkyDrive)
[*]General - Add simple web UI page dedicated to viewing video via a web browser with ability to view video full-screen (albeit at a low resolution)
[*]General - Add sound detection functionality with controls and scheduling similar to motion detection (see comprehensive description here)
[*]General - Disable telnet and enable SSH for command line access
[*]General - Display full firmware version (including build) in upper right corner of all web interface pages
[*]General - Improve daylight savings time support for locations where the start and end dates span a new year
[*]General - Option to include thumbnail sized logo on corner of all screenshots
[*]General - SMB Support
[*]General - Support for Cloud service (e.g. Dropbox, Box, Google Drive, OneDrive, etc.) uploading support
[*]Email/FTP - Ability to configure JPEG parameters for image quality
[*]Email/FTP - Ability to independently specify different resolution for images sent via email versus FTP
[*]FTP - SFTP Support
[*]FTP - Test message should appear on the FTP setup page following a refresh (currently requires iterating through 3 pages and back)
[*]Image/Video - Ability to rotate image at 90 degree intervals to accommodate cameras mounted in landscape versus portrait view
[*]Image/Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
[*]Image/Video - Additional image settings (e.g. color, temperature, tint, Sharpness, etc.)
[*]Image/Video - Audio and video RTSP Streaming (.cgi is not the best solution for protocols like VLC)
[*]Image/Video - Auto light exposure option
[*]Image/Video - Digital image pan
[*]Image/Video - Independent brightness settings for Day Mode and Night Mode[*]Motion Detection - More detailed grid (i.e. smaller boxes) to improve motion detection area selection
[*]Image/Video - Add OSD option for saved video
[*]Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
[*]Motion Detection - Option to set unique sensitivity settings to each grid area in the motion detection configuration screen
[*]Motion Detection - Support for email/FTP of video
[*]Motion Detection - User defined frame capture rate for motion detection emails (independent of video FPS)
[*]mydlink - mydlink registration independent of device configuration wizard
[*]Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
[*]Night Mode - Ability to disable the IR illuminators (for owners who use external IR illuminators and want avoid reflections off of glass surfaces)
[*]Night Mode - Option to temporarily disable audio recording to filter out the noise from the IR filter during Day/Night mode transitions
[*]Night Mode - Option to temporarily disable motion detection during the transition between day/night mode
[*]Scheduling - Ability to schedule events with more granularity (e.g. schedule specific hours for each day and grouping weekday versus weekend schedules)
[*]Scheduling - Camera start/shut-down on a schedule
[*]Scheduling - Reboot on a schedule
[*]Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
[*]Security - Add ability to enable/disable HTTPS port
[*]Security - Add ability to save log files to track camera activity and troubleshoot issues
[*]Security - Add ability to modify non-admin user privileges (e.g. ability for user to enable/disable night mode and sound)
[*]Security - Email log of successful and unsucessful access attempts
[*]Security - Support for WPA2 Enterprise (Radius)
[*]Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
[*]Security - User and admin password lengths are too short
[*]Security - When logged in, the Admin user account and mobile device account users do not display under "STATUS > Active User  > USER LIST" table
[*]Status - Add more detail to status page (e.g. email enabled or ftp enabled, motion detection enabled, up-time, etc.)
[*]Status - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
[*]Status - Track and display total uptime and total running time
[*]Time - Include "Update Now" button when the Synchronize NTP SErver" option is selected during time configuration
[*]Time - Retain "NTP Server Used" in memory
[*]Time - Support for 24 hour time format
[*]Time - Timezone changes should be immediately effective without a camera reboot (changes currently require a reboot)
[*]Time - Use last known time following power failure
[*]Time - Option to include date and time stamps on captured images
[*][Bug] UPnP - When UPnP forwarding is disabled, the DCS-932L still creates UPnP ports on the host router (This creates potential conflicts with other services)
[/list]

Wishlist Items Addressed by D-Link (Thank You!)

[*]Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
[*]Motion Detection - Motion detection email on a user defined schedule [FIXED!]
[*]Motion Detection - Motion detection FTP on a schedule [FIXED!]
[*]General - Daylight savings time support [FIXED!]
[*]General - Timezone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time (see original post here)  [FIXED!]
[*]Audio - Resolve intermittent background audio clicking [FIXED!]
[*][Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
[*]Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner [FIXED!][/list]

Trel:
registered to add +1 to disable IR LEDs independantly of day/night mode to allow for external illumination. =)

JavaLawyer:

--- Quote from: Trel on July 07, 2014, 10:51:58 PM ---registered to add +1 to disable IR LEDs independantly of day/night mode to allow for external illumination. =)

--- End quote ---

This request is sought after by many DCS-932L owners, myself included!  ;)

JavaLawyer:
This wishlist contains firmware suggestions provided by the forum community and may not reflect actual changes to current or future D-Link firmware releases. Below is a summary of everyone's input thus far. Please let me know if I over generalized, misrepresented, or missed anyone's concerns and I'll refresh the list with updates. Recent items are highlighted in Green.

DCS-932L Wishlist

[*]General - Ability to upload to web/cloud storage (e.g. Amazon S3, Windows Azure, SkyDrive)
[*]General - Add simple web UI page dedicated to viewing video via a web browser with ability to view video full-screen (albeit at a low resolution)
[*]General - Add sound detection functionality with controls and scheduling similar to motion detection (see comprehensive description here)
[*]General - Disable telnet and enable SSH for command line access
[*]General - Display full firmware version (including build) in upper right corner of all web interface pages
[*]General - Improve daylight savings time support for locations where the start and end dates span a new year
[*]General - Option to include thumbnail sized logo on corner of all screenshots
[*]General - SMB Support
[*]General - Support for Cloud service (e.g. Dropbox, Box, Google Drive, OneDrive, etc.) uploading support
[*]Email/FTP - Ability to configure JPEG parameters for image quality
[*]Email/FTP - Ability to independently specify different resolution for images sent via email versus FTP
[*]FTP - SFTP Support
[*]FTP - Test message should appear on the FTP setup page following a refresh (currently requires iterating through 3 pages and back)
[*]Image/Video - Ability to rotate image at 90 degree intervals to accommodate cameras mounted in landscape versus portrait view
[*]Image/Video - Add "2" FPS option to the FPS drop-down menu (currently 1, 5, 7, 15, 20, 30)
[*]Image/Video - Additional image settings (e.g. color, temperature, tint, Sharpness, etc.)
[*]Image/Video - Audio and video RTSP Streaming (.cgi is not the best solution for protocols like VLC)
[*]Image/Video - Auto light exposure option
[*]Image/Video - Digital image pan
[*]Image/Video - Independent brightness settings for Day Mode and Night Mode[*]Motion Detection - More detailed grid (i.e. smaller boxes) to improve motion detection area selection
[*]Image/Video - Add OSD option for saved video
[*]Motion Detection - Motion detection indicator integrated in the web interface to more easily (and accurately) adjust sensitivity
[*]Motion Detection - Option to set unique sensitivity settings to each grid area in the motion detection configuration screen
[*]Motion Detection - Support for email/FTP of video
[*]Motion Detection - User defined frame capture rate for motion detection emails (independent of video FPS)
[*]mydlink - mydlink registration independent of device configuration wizard
[*]Night Mode - Ability to adjust the light level required to trigger the transition between Day and Night Modes
[*]Night Mode - Ability to disable the IR illuminators (for owners who use external IR illuminators and want avoid reflections off of glass surfaces)
[*]Night Mode - Option to temporarily disable audio recording to filter out the noise from the IR filter during Day/Night mode transitions
[*]Night Mode - Option to temporarily disable motion detection during the transition between day/night mode
[*]Scheduling - Ability to schedule events with more granularity (e.g. schedule specific hours for each day and grouping weekday versus weekend schedules)
[*]Scheduling - Camera start/shut-down on a schedule
[*]Scheduling - Reboot on a schedule
[*]Security - Ability to disable broadcasting of video/audio feed (i.e. to prevent potential hijacking of feed)
[*]Security - Add ability to enable/disable HTTPS port
[*]Security - Add ability to save log files to track camera activity and troubleshoot issues
[*]Security - Add ability to modify non-admin user privileges (e.g. ability for user to enable/disable night mode and sound)
[*]Security - Email log of successful and unsucessful access attempts
[*]Security - Support for WPA2 Enterprise (Radius)
[*]Security - Support for secure broadcasting of video/audio feed (SSL, HTTPS)
[*]Security - User and admin password lengths are too short
[*]Security - When logged in, the Admin user account and mobile device account users do not display under "STATUS > Active User  > USER LIST" table
[*]Status - Add more detail to status page (e.g. email enabled or ftp enabled, motion detection enabled, up-time, etc.)
[*]Status - Status page containing the number and type of connections currently served and actual time/operational status (Current JavaScript implementation falsely reports connection time by incrementing counter when camera is powered off)
[*]Status - Track and display total uptime and total running time
[*]Time - Include "Update Now" button when the Synchronize NTP SErver" option is selected during time configuration
[*]Time - Retain "NTP Server Used" in memory
[*]Time - Support for 24 hour time format
[*]Time - Timezone changes should be immediately effective without a camera reboot (changes currently require a reboot)
[*]Time - Use last known time following power failure
[*]Time - Option to include date and time stamps on captured images
[*][Bug] UPnP - When UPnP forwarding is disabled, the DCS-932L still creates UPnP ports on the host router (This creates potential conflicts with other services)
[/list]

Wishlist Items Addressed by D-Link (Thank You!)

[*]Motion Detection - User defined minimal interval between motion detection emails (to avoid flood of emails during a prolonged motion detection event) (e.g. 1, 2, 3, 5, or 10 minutes) [FIXED!]
[*]Motion Detection - Motion detection email on a user defined schedule [FIXED!]
[*]Motion Detection - Motion detection FTP on a schedule [FIXED!]
[*]General - Daylight savings time support [FIXED!]
[*]General - Timezone configuration does not function properly. When timezone is changed, the device gets confused and fails to sync the correct time (see original post here)  [FIXED!]
[*]Audio - Resolve intermittent background audio clicking [FIXED!]
[*][Bug] Password - Passwords created that exceed the maximum length (8 characters) are not rejected, only the first 8 characters are accepted (firmware should reject the password and generate an error message) [FIXED!]
[*]Video - The "Zoom" function in the web UI should magnify the video image from the center of the frame rather than the top left corner [FIXED!][/list]

Navigation

[0] Message Index

[*] Previous page