• March 28, 2024, 06:21:52 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: PPTP Problem on DI-804HV (Can't Access Remote Resources)  (Read 5395 times)

amisdar

  • Level 1 Member
  • *
  • Posts: 1
PPTP Problem on DI-804HV (Can't Access Remote Resources)
« on: July 30, 2011, 08:20:46 PM »

Hi guys, here's my scenario:

I've set up VPN router at my office using DI-804HV with PPTP Server enabled. I followed the guide that I found here:

ftp://files.dlink.com.au/products/DI-804HV/REV_C/SetupGuides/VPN_WindowsXP_PPTP_to_DI-804HV_Setup_Guide_v2.0.pdf

The config parameter for the DI-804HV is as below:

IP Address: 192.168.1.254
Subnet Mask: 255.255.255.0
DHCP Server: Enabled
Virtual IP of PPTP Server: 10.0.0.1

At home, my DIR-655 router is as below:

IP Address: 192.168.2.254
Subnet Mask: 255.255.255.0
DHCP Server: Enabled

From my PC, I have created the PPTP VPN dialer and I'm able to get connected to the VPN on my office. However, I can't access any resources or ping any computers located over there. Here's the dialer's parameter that I got once my VPN has been established:

Server Type: PPP
Transport: TCP/IP
Server IP Address: 10.0.0.1
Client IP Address: 10.0.0.2

What went wrong here? Thanks in advance :-)
« Last Edit: July 30, 2011, 08:38:10 PM by amisdar »
Logged