• March 28, 2024, 02:06:49 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: [1] 2

Author Topic: d-viewcam cannot record DCS-960L?  (Read 10745 times)

roy_lumanauw

  • Level 1 Member
  • *
  • Posts: 1
d-viewcam cannot record DCS-960L?
« on: July 04, 2016, 09:49:13 AM »

When I tried to register DCS-960L in d-viewcam, I could not find the camera model in the selection provided. So is there a way I can record DCS-960L using d-viewcam?
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: d-viewcam cannot record DCS-960L?
« Reply #1 on: August 02, 2016, 06:55:10 AM »

Any status on this?
What version of DVC are you using?
You may have to manually add the camera using it's IP address and see...

When I tried to register DCS-960L in d-viewcam, I could not find the camera model in the selection provided. So is there a way I can record DCS-960L using d-viewcam?
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

greatham316

  • Level 1 Member
  • *
  • Posts: 3
Re: d-viewcam cannot record DCS-960L?
« Reply #2 on: March 06, 2017, 05:28:21 PM »

Anything regarding recording via D-ViewCam for the 960l? I'm running 4.1.1 and 1.0.4 firmware and I can't connect via IP though I can view it remotely via IP Camera apps using a dynamic dns but can't connect to it using the dns or the local IP address.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: d-viewcam cannot record DCS-960L?
« Reply #3 on: March 07, 2017, 07:56:35 AM »

I'll check with mine as see what I find out.

Is the camera using a dynamic IP address or static? Might try a static IP address ON the camera that's out side of your main host routers DHCP IP address pool.

Anything regarding recording via D-ViewCam for the 960l? I'm running 4.1.1 and 1.0.4 firmware and I can't connect via IP though I can view it remotely via IP Camera apps using a dynamic dns but can't connect to it using the dns or the local IP address.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

greatham316

  • Level 1 Member
  • *
  • Posts: 3
Re: d-viewcam cannot record DCS-960L?
« Reply #4 on: March 08, 2017, 10:19:41 AM »

I'm using a static IP address for the camera. I am using a dns server and I can log in to the remotely no problem but it doesn't show up on dviewcam. I also tried it locally at my store PC and it doesn't come up using the local IP address either. I am going to do a factory restore on it because the SD card recording isn't working either. Thanks.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: d-viewcam cannot record DCS-960L?
« Reply #5 on: March 08, 2017, 10:26:34 AM »

I'll try and check this out with my 960L as well. I was going to last nite however the DVC I have loaded I forgot the PW so I'm having to re-install it.  ::)

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

greatham316

  • Level 1 Member
  • *
  • Posts: 3
Re: d-viewcam cannot record DCS-960L?
« Reply #6 on: March 08, 2017, 10:40:27 AM »

I just did the factory restore and basic changes to static ip, the device password, and camera quality and I can add it to DVC locally and remotely. I added it as a 942L, inconsistent device warning comes up but I just ignore and it works just fine. It is recording remotely so I don't need the local SD card recording. Thanks everyone for the help!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: d-viewcam cannot record DCS-960L?
« Reply #7 on: March 08, 2017, 11:04:16 AM »

Ok, I presume that the camera is a newer model and wasn't added or updated with current versions of DVC. I presume if D-Link does another update to DVC, it maybe added for official support.

Using a listed model should work as most of the cameras are similar as far as networking goes.  ::)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Watcher

  • Level 2 Member
  • **
  • Posts: 45
Re: d-viewcam cannot record DCS-960L?
« Reply #8 on: June 24, 2017, 08:02:44 AM »

I added it as DCS-2332L, ignoring the inconsistency warning. Works fine with all the functions.
« Last Edit: June 24, 2017, 11:01:14 AM by Watcher »
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: d-viewcam cannot record DCS-960L?
« Reply #9 on: June 24, 2017, 10:57:28 AM »

Thanks for letting us know. I believe DCS-942L works as well. Could to have additional options. DVCs device pack was updated recently however only DCS-936L was added, not sure why the 960L wasn't included.  ::)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Watcher

  • Level 2 Member
  • **
  • Posts: 45
Re: d-viewcam cannot record DCS-960L?
« Reply #10 on: June 24, 2017, 11:01:45 AM »

Also works with "Universal model". The only thing that does not work is sound. I get a stream that reminds of the old modem sound, and it does not disappear if I turn off the microphone through the web interface, so it seems the wrong stream uri is read.

Apropos 942L profile - it does not provide sound either, but it simply gives silence.
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: d-viewcam cannot record DCS-960L?
« Reply #11 on: June 24, 2017, 11:02:42 AM »

Does the 2332L model give sound? Ya we found that the other models don't give sound...
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Watcher

  • Level 2 Member
  • **
  • Posts: 45
Re: d-viewcam cannot record DCS-960L?
« Reply #12 on: June 24, 2017, 11:06:15 AM »

Does the 2332L model give sound? Ya we found that the other models don't give sound...

Alas, no - it also gives the "modem"-like noise.  :-\
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: d-viewcam cannot record DCS-960L?
« Reply #13 on: June 24, 2017, 11:17:27 AM »

Ok. I'll pass this on to D-Link and see if they can add the 960L. At least you can get video.  ::)
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

Watcher

  • Level 2 Member
  • **
  • Posts: 45
Re: d-viewcam cannot record DCS-960L?
« Reply #14 on: June 25, 2017, 02:56:55 AM »

Ok. I'll pass this on to D-Link and see if they can add the 960L. At least you can get video.  ::)

That would be great.
Incidentally, I have a DCS-2630L added using "Universal model" profile, and there I get both video and audio correctly. So 960L seems to have it's own implementation of the audio stream.
Logged
Pages: [1] 2