Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[kbhag]

Hi,
here is the setup I'm trying:
ISPModem----(WANport)DLinkMain(LANport)-----(WANport)DlinkVPN----PC

PC can browse internet successfully. DHCP enabled on both routers with different subnets.
However, when I change the Internet Connection Type on DlinkVPN to "PPTP" and input all the details of the PPTP connection, the globe LED on Dlink VPN turns steady orange, and I lose connectivity on the PC.seems like authentication succeeds, but connections closes for some reason.
I can connect to VPN using same settings with a PC directly - so nothing wrong with settings.
This is what I see in the logs: (x.y.z.a is the PPTP server IP)

Code: [Select]

Thu Sep 12 11:15:07 2019 warning: no upstream servers configured
Thu Sep 12 11:15:06 2019 no servers found in /etc/resolv.conf, will retry
Thu Sep 12 11:15:06 2019 DHCP: Client release IP 192.168.2.199 to server 192.168.2.1.
Thu Sep 12 11:15:05 2019 PPP: Connection terminated.
Thu Sep 12 11:15:02 2019 anon log[call_callback:accel-pptp/pptp_callmgr.c:79]: Closing connection (call state)
Thu Sep 12 11:15:02 2019 anon log[pptp_read_some:accel-pptp/pptp_ctrl_0_7_13.c:542]: read returned zero, peer has closed
Thu Sep 12 11:15:02 2019 anon log[ctrlp_rep:accel-pptp/pptp_ctrl_0_7_13.c:251]: Sent control packet type is 12 'Call-Clear-Request'
Thu Sep 12 11:15:02 2019 anon log[callmgr_main:accel-pptp/pptp_callmgr.c:269]: Closing connection (shutdown)
Thu Sep 12 11:15:02 2019 anon log[pptp_read_some:accel-pptp/pptp_ctrl_0_7_13.c:542]: read returned zero, peer has closed
Thu Sep 12 11:15:01 2019 CHAP authentication succeeded.
Thu Sep 12 11:15:01 2019 anon log[ctrlp_disp:accel-pptp/pptp_ctrl_0_7_13.c:907]: Outgoing call established (call ID 45, peer's call ID 8576).
Thu Sep 12 11:15:01 2019 anon log[ctrlp_disp:accel-pptp/pptp_ctrl_0_7_13.c:868]: Received Outgoing Call Reply. callid= 45
Thu Sep 12 11:15:00 2019 anon log[ctrlp_rep:accel-pptp/pptp_ctrl_0_7_13.c:251]: Sent control packet type is 7 'Outgoing-Call-Request'
Thu Sep 12 11:15:00 2019 anon log[ctrlp_disp:accel-pptp/pptp_ctrl_0_7_13.c:783]: Client connection established.
Thu Sep 12 11:15:00 2019 anon log[ctrlp_disp:accel-pptp/pptp_ctrl_0_7_13.c:749]: Received Start Control Connection Reply
Thu Sep 12 11:15:00 2019 warning: no upstream servers configured
Thu Sep 12 11:15:00 2019 anon log[ctrlp_rep:accel-pptp/pptp_ctrl_0_7_13.c:251]: Sent control packet type is 1 'Start-Control-Connection-Request'
Thu Sep 12 11:14:59 2019 anon log[callmgr_main:accel-pptp/pptp_callmgr.c:140]: unix_sock
Thu Sep 12 11:14:59 2019 anon log[callmgr_main:accel-pptp/pptp_callmgr.c:136]: control connection
Thu Sep 12 11:14:59 2019 anon log[callmgr_main:accel-pptp/pptp_callmgr.c:132]: IP: x.y.z.a



[FurryNutz]

I don't believe that is a supported configuration for VPN. You'd be in a double NAT condition which would also be a factor.

[kbhag]

Thanks. I disable NAT on Dlink VPN, and the config is same as running a VPN client on a PC. Still doesn't work. I have all ALG enabled on the DLinkMain.

[FurryNutz]

Is the 868L configured for this mode?
Turning a router into an AP.