D-Link Forums

D-Link Wireless Access Points For Business => DAP-2695 => Topic started by: Cerberus on July 25, 2017, 03:00:03 AM

Title: Error 403 accessing Webgui after updating several APs to 1.20RC075
Post by: Cerberus on July 25, 2017, 03:00:03 AM
Hi,

today i updated several APs from 1.16 to 1.20RC075. Now the Webgui is no longer accessible, i get error 403 on all my devices.

How to solve this issue?

Thanks in advance
Title: Re: Error 403 accessing Webgui after updating several APs to 1.20RC075
Post by: Cerberus on July 25, 2017, 03:18:35 AM
Okay i found a workaround. i have IPv4 and IPv6 enabled and DNS entrys for all APs. Default my client try to access the AP over IPv6 first, this worked fine on 1.16 but seems to be broken on 1.20. Accessing WebGUI over IPv6 now gives me error 403 access denied.

Workaround is to access the Web Interface with IPv4 Address. SSH still works with both protocols.
Title: Re: Error 403 accessing Webgui after updating several APs to 1.20RC075
Post by: FurryNutz on July 25, 2017, 10:16:56 AM
It's possible that when the update is performed that IPv6 gets disabled and you have to re-enabled it after updating the FW.

Thank you for sharing this information. Hope it helps future users.