Topic: [SOLVED] Curl command in motion (Read 3713 times)

rebelo · « **on:** January 23, 2017, 10:14:14 AM »

Hi.

Firmware 2.14
Trying to enable/ disable the motion detection feature by a curl command like:

curl -u userid:password http://IPaddress/setSystemMotion –referer http://IPaddress/motion.htm -d « ReplySuccessPage=motion.htm&ReplyErrorPage=motion.htm&MotionDetectionEnable=1&MotionDetectionScheduleDay=0&MotionDetectionScheduleMode=0&MotionDetectionSensitivity=30&ConfigSystemMotion=Save » > /dev/null 2>&1

but keeping getting error

Code: [Select]

<html><body><h1>The request is forbidden.</h1></body></html>
curl: (6) Could not resolve host: xn--referer-t16c
<html><body><h1>The request is forbidden.</h1></body></html>
curl: (6) Could not resolve host: ReplySuccessPage=motion.htm

The end use is to append this to a virtual switch in Domoticz that allows me to turn this function on/ off remotely via its own control panel.
Any help would be appreciated.

Tks
Rebelo

rebelo · « **Reply #1 on:** January 24, 2017, 10:14:48 AM »

Well found it using the help form this post:
http://forums.dlink.com/index.php?topic=58573.0

A simple http request assigned in the switch did the trick
http://username:password@cameraIP:port/config/motion.cgi?enable=yes

Try with and without port number.

Tks all
Rebelo

FurryNutz · « **Reply #2 on:** March 07, 2017, 06:56:58 AM »

Thanks for posting. Hope this help future users.
Enjoy.

D-Link Forums

News:

Author Topic: [SOLVED] Curl command in motion (Read 3713 times)

rebelo

[SOLVED] Curl command in motion

rebelo

Re: Curl command in motion

FurryNutz

Re: [SOLVED] Curl command in motion