D-Link Forums

The Graveyard - Products No Longer Supported => Routers / COVR => DIR-890L => Topic started by: aminenh2 on August 19, 2016, 05:45:12 AM

Title: NEW Firmware released 1.10b07 for Dlink 890L - AU Region Only!!!
Post by: aminenh2 on August 19, 2016, 05:45:12 AM

Hello All,

The NEW Firmware released  1.10b07 for Dlink 890L

http://files.dlink.com.au/Products/DIR-890L/REV_A/Firmware/Firmware_v1.10b07/

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L
Post by: aminenh2 on August 19, 2016, 05:54:55 AM

DIR-890L Firmware Release Notes
=================================

**Note: a factory reset is recommended after upgrading to ensure correct configuration is applied**

Hardware: Rev. Ax
Firmware: V1.10
Date: 27/06/2016


Enhancements
1. Added VLAN tagging support for NZ UFB connections
2. Enhancement to Wi-Fi stability
3. USB performance enhancement
4. iQoS update
5. IPv6 6 in 4 improved

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L
Post by: FurryNutz on August 19, 2016, 06:52:44 AM

Woah horsey, this is for the AU region. Not for any other region. Users out side of the AU region are advised not to use this version. There has been no newer official release of this version or any other than v1.09 at this time.

I'll do some checking to see if this or any other updates for the 890L maybe forth coming for other regions.

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L - AU Region Only!!!
Post by: FurryNutz on August 19, 2016, 10:41:37 AM

V1.10 is forth coming for the NA and probably other regions. Testing in progress. Please be patient and keep looking at D-Link USA site for updates. I'll post here in the forums when I see it as well.
 ;)

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L - AU Region Only!!!
Post by: aminenh2 on August 19, 2016, 11:00:16 AM

Hello,

I tested the firmware 1.10, it works very well.

 8) ;D

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L - AU Region Only!!!
Post by: FurryNutz on August 19, 2016, 11:01:49 AM

Thanks for letting us know. Glad it works well for your region. Might want to check with your regional D-Link office if there is any issues regarding this:
http://forums.dlink.com/index.php?topic=56542.0 (http://forums.dlink.com/index.php?topic=56542.0)

Our region is in testing and a bit more development here.  ;)
http://supportannouncement.us.dlink.com/announcement/publication.aspx?name=SAP10063 (http://supportannouncement.us.dlink.com/announcement/publication.aspx?name=SAP10063)

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L - AU Region Only!!!
Post by: aminenh2 on August 19, 2016, 11:37:29 AM

Hello more Options . my région is BELGIUM

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L - AU Region Only!!!
Post by: FurryNutz on August 19, 2016, 12:10:22 PM

Thanks for the feed back.

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L
Post by: IMRJS on August 30, 2016, 03:40:42 PM

Why is this AU only if its on the USA site?
http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2FR (http://support.dlink.com/ProductInfo.aspx?m=DIR-890L%2FR)

Thanks,

Ryan

Quote from: FurryNutz on August 19, 2016, 06:52:44 AM

Woah horsey, this is for the AU region. Not for any other region. Users out side of the AU region are advised not to use this version. There has been no newer official release of this version or any other than v1.09 at this time.

I'll do some checking to see if this or any other updates for the 890L maybe forth coming for other regions.

Title: Re: NEW Firmware released 1.10b07 for Dlink 890L - AU Region Only!!!
Post by: FurryNutz on August 30, 2016, 04:37:21 PM

Two security issues were addresses on this version for the NA region:
http://forums.dlink.com/index.php?topic=65499.0 (http://forums.dlink.com/index.php?topic=65499.0)