D-Link Forums
The Graveyard - Products No Longer Supported => D-Link NetDefend Firewalls => Topic started by: tweaknoob on June 18, 2009, 01:26:32 PM
-
I am connecting a HT-502 ATA in the LAN, behind the DFL-210 firewall.
I configured the firewall to accept incoming communications from the IP service provider server using SAT with SIP protocol.
The problem is that some calls are stopped by the firewall while others are not, and I don't know why.
When the calls are stopped the following info is recorded in the firewall log.
Severity: Warning
Category: RULE
ID: 6000051
Protocol: UDP
Event: ruleset_drop_packet
Action: drop
I want to know which rule is filtering the call. It's a firewall default rule? What "ID:6000051" means?
-
I would turn logging on on the incoming IP rules, and then see if you see a difference in connections between failed and non-failed calls.
I would ensure that your effected traffic is not falling under another (higher) rule.
I would ensure that the correct rules for this traffic do not have any ALGs applied (we would see an ALG log, but I don't want to eliminate possibilities).
As for ID:6000051, I don't personally know, and I suspect it is unimportant to our work here, there may be answers in the log reference guide on http://security.dlink.com.tw, but I honestly don't know myself if it would be listed there or not.
-
Finally I got it!!!
The problem was solved enabling UDP Bidirectional keep-alive, in Advanced Settings, Conn. Timeout Settings.
I don't know why but it did not work using SIP ALG, I just used "All TCPUDP" in LAN to WAN Rules. It was not necessary to use a SAT-allow rule for the incoming connections from the VoIP Server.
Thank you for your tips Fatman. :D