• July 13, 2024, 02:20:25 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Repeater DIR-505 throughput fluctuation  (Read 8487 times)


  • Level 1 Member
  • *
  • Posts: 1
Repeater DIR-505 throughput fluctuation
« on: November 18, 2016, 03:55:57 AM »


I have bought a D-Link repeater DIR-505 and have tested its throughput using iPerf.

The throughput of this repeater is very good, but when configuring the WAN in the Ethernet port, the throughput drops to "0" each period of around 10 seconds. As shown on image below

For curiosity, when configuring the WAN of the repeater as wireless signal I did not get this problem.

Is my router with problems or it is common?

Thank you.




  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Repeater DIR-505 throughput fluctuation
« Reply #1 on: November 21, 2016, 07:02:17 AM »


  • What Hardware version is your router? Look at sticker under the router case.
  • Link>What Firmware version is currently loaded? Found on the routers web page under status.
  • What region are you located?
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.