D-Link Forums

The Graveyard - Products No Longer Supported => DIR-655 => Routers / COVR => Europe DIR-655 => Topic started by: retho on June 06, 2010, 04:03:06 AM

Title: DIR-655 dose not accept change setting after first time install
Post by: retho on June 06, 2010, 04:03:06 AM

After first time install and save I can not save changed settings. I have tried different things like change DHCP IP Address Range or set Admin password. Nothing of this is saved.
After I click Save Setting Button the network will be broken for short time, then it is renewed and I can login web interface again. but nothing has changed, the same DHCP IP Address Range as before, Admin password still blank.

What's wrong with this router?

The only way I can change for example the DHCP IP Address Range is to reset the router to defaults and then made the changes!

Title: Re: DIR-655 dose not accept change setting after first time install
Post by: b!3n3n3b3r on June 07, 2010, 10:45:46 AM

Hey retho,

which firmware do you use?

The behaviour, you described, is a well known issue of the 1.21EU firmware. In this case, you should upgrade the fw with the neweset european one.

Title: Re: DIR-655 dose not accept change setting after first time install
Post by: retho on June 18, 2010, 12:53:54 AM

It was the firmware 1.21, original as buyed.
Now I've update to DIR-655_fw_reva_132EUb01_ALL_multi_20100210 and this solve the problem.