Topic: Going back to stock firmware on D-Link Dir-300 (Read 12117 times)

Joe96 · « **on:** August 13, 2014, 10:37:05 AM »

Hey, I have DD-WRT and i tried going back to my original firmware, but i can't. On Firmware Upgrade in DD-WRT, it gives me Upgrade Failed, while using Emergency Room Web Interface, i can't seem to reach it. I followed the instructions, unplugged the router, pressed the reset button, plugged back while pressing, the power led started flashing, i modified my ip settings for 192.168.0.2, and while accessing http://192.168.0.1 with Firefox browser, i get Connection Reset error.

FurryNutz · « **Reply #1 on:** August 13, 2014, 10:41:02 AM »

Link>Welcome!

What Hardware version is your router? Look at sticker under router.
Link>What Firmware version is currently loaded? Found on the routers web page under status.
What region are you located?

You'll need to refer to the DD-WRT web site for recovery support information.

D-Link Forums

News:

Author Topic: Going back to stock firmware on D-Link Dir-300 (Read 12117 times)

Joe96

Going back to stock firmware on D-Link Dir-300

FurryNutz

Re: Going back to stock firmware on D-Link Dir-300