• March 28, 2024, 03:39:29 PM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: dsl-2600u wrong firmware (hw id)  (Read 7333 times)

A.Rahman.A

  • Level 1 Member
  • *
  • Posts: 2
dsl-2600u wrong firmware (hw id)
« on: January 08, 2017, 02:24:48 AM »

hi

i update my modem firmware through web interface.
but after that modem didn't send any respond and  only  adsl(green) and internet(both red and green) light is on.

after searching i found that only working connection to modem is  serial connection.
i have working connection to modem using rx , tx and gnd.
now i need help because i can't  find any tutorials that help me repair my  dsl modem.
when i read serial port using putty this is the only output when modem boot normally :
Code: [Select]

Bootbase Version: VTC_SPI1.26 |  2012/12/26 16:00:00
RAM: Size = 16384 Kbytes
Found SPI Flash 2MiB Winbond W25Q16 at 0xbfc00000


by pressing reset button and rebooting:
Code: [Select]
RT63365 at Tue May 8 19:47:16 CST 2012 version 0.8

Memory size 16MB

HWCONF=04005d00
DRAM Mode=00000000
MCC1=00000000

Search PHY addr and found PHY addr=0
done

modem details:
dsl-2600u
hw id : z2
(i uploaded  z1 image )
connection detail:
usb2serial converter : arduino nano com port

modem front lights:


back view:

Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dsl-2600u wrong firmware (hw id)
« Reply #1 on: January 08, 2017, 12:18:45 PM »

Link>Welcome!

  • What region are you located?

Does the modem section of this help any?
Emergency Recovery Mode
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

A.Rahman.A

  • Level 1 Member
  • *
  • Posts: 2
Re: dsl-2600u wrong firmware (hw id)
« Reply #2 on: January 08, 2017, 01:05:27 PM »

tnx for reply
i'm from Iran
but no help from regional support.

and guides in Emergency Recovery Mode don't work in this case .

also  i tried some other guide , but no success except serial connection but in this one i am unfamiliar with console commands or tricks.

is there any help or hope that can fix this issue ?!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: dsl-2600u wrong firmware (hw id)
« Reply #3 on: January 08, 2017, 02:42:51 PM »

I presume if any of this doesn't work, the unit maybe now bad and needs replacing.

Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.