• April 26, 2024, 12:26:27 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Infrared light flashes every 2 sec  (Read 4818 times)

fliebe

  • Level 1 Member
  • *
  • Posts: 4
Infrared light flashes every 2 sec
« on: August 19, 2013, 12:01:50 PM »
When activate the IR light "IR Light Control" is On or Sync or Schedule. Its become red only for 30 sec. after that, become off and on every 2 seconds and the image changes from dark to bright.

I use FW DCS-2132L_A1_FW_V1.01.10 and then try the 08 version , but are the same

I setup 3 cameras and only one do this ....

Some ideas?

Best regards
Fernando
Logged

oranges

  • Level 2 Member
  • **
  • Posts: 39
Re: Infrared light flashes every 2 sec
« Reply #1 on: August 19, 2013, 12:22:14 PM »
Have you tried Firmware: 1.01.06? Just curious cause i seemed to have some issues with infrared after i upgraded to DCS-2132L_A1_FW_V1.01.10. I downgraded to .06 and my issue seems to be resolved.
Logged
DIR-655 Router
Buffallo Linkstation Live 1TB
DCS-932L
DCS-2132L

fliebe

  • Level 1 Member
  • *
  • Posts: 4
Re: Infrared light flashes every 2 sec
« Reply #2 on: August 19, 2013, 01:45:11 PM »
I only find

FW v 1.00_06
FW v 1.01.08 
FW v 1.01.10 

Are you sure about 1.01.06

I try 1.00_06 and is the same , IR still flashing  :(

Fernando
Logged

oranges

  • Level 2 Member
  • **
  • Posts: 39
Re: Infrared light flashes every 2 sec
« Reply #3 on: August 20, 2013, 07:38:24 AM »
My bad, it was 1.00_06.
Logged
DIR-655 Router
Buffallo Linkstation Live 1TB
DCS-932L
DCS-2132L

fliebe

  • Level 1 Member
  • *
  • Posts: 4
Re: Infrared light flashes every 2 sec
« Reply #4 on: August 23, 2013, 11:35:07 AM »
I think is hardware failure , a try reset , all FW an nothing

I bought 3 units and only one has this behavior

Bad luck

Fernando
Logged