• March 28, 2024, 04:23:25 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 [2]

Author Topic: Re: BETA FIRMWARE 1.11 B02  (Read 30654 times)

Lycan

  • Administrator
  • Level 15 Member
  • *
  • Posts: 5335
Re: BETA FIRMWARE 1.11 B02
« Reply #15 on: August 08, 2008, 09:46:53 AM »

There is a DGL-4500 1.12 that is our offical release.
Give that a try guys. I've been using it for two days, so far so good.
I'm runing a full diagnostic on SIP traffic, but other then that I see no problems.
Logged

FromAtoN

  • Level 2 Member
  • **
  • Posts: 58
Re: BETA FIRMWARE 1.11 B02
« Reply #16 on: August 08, 2008, 01:34:30 PM »

Will we have to reconfigure the entire router again?  Will uploading a previous saved configuration work this time?
Logged

Lycan

  • Administrator
  • Level 15 Member
  • *
  • Posts: 5335
Re: BETA FIRMWARE 1.11 B02
« Reply #17 on: August 08, 2008, 04:21:40 PM »

yes, you can upload a config
Logged

jmalon

  • Guest
Re: BETA FIRMWARE 1.11 B02
« Reply #18 on: August 09, 2008, 06:22:05 PM »

Sorry, but my experience has been that I haven't been able to load a config from 1.11 Beta (or previous versions) after upgrading to 1.12.
Logged

Dragonslore

  • Level 2 Member
  • **
  • Posts: 91
Re: BETA FIRMWARE 1.11 B02
« Reply #19 on: August 09, 2008, 07:34:43 PM »

I'm running 1.12 and I'd like to say that I have not had any problems loading a Config File to restore a previous configuration.

Matter of fact, with each of the previous versions, I've not had any problems.

 -

Then again, for those having problems, Before updating the Firmware, have you tried

 1st - Disable the Wireless
 2nd - Disconnect everything from the router (except your main system)

Then after you successfully flash your Router, Login and try to Load and restore the Config file.

 -

This is the proceedure I follow each time.
Logged
- Excuse the writing, I've got a Dyslexic Keyboard

mcannon-gso

  • Level 2 Member
  • **
  • Posts: 25
Re: BETA FIRMWARE 1.11 B02
« Reply #20 on: August 10, 2008, 03:13:55 PM »

There is a DGL-4500 1.12 that is our offical release.
Give that a try guys. I've been using it for two days, so far so good.
I'm runing a full diagnostic on SIP traffic, but other then that I see no problems.

I have upgraded to FW 1.12 and my SIP is working after I set Stun options on the phone adapter. I did not need to do this before. Ohh well maybe it's for the better...
My biggest issue is that I have to constantly re-configure my system after upgrading. It always tells me that it is either not the proper config or it is corupted.. I am running Windows vista.

Please Lycan have them work on this to correct..  This is such a pain in the a$$ .......

Thanks,
--Mike
Logged

Reinvented

  • Level 4 Member
  • ****
  • Posts: 437
Re: BETA FIRMWARE 1.11 B02
« Reply #21 on: August 10, 2008, 06:56:57 PM »

With 1.12, a big problem has surfaced.  No longer able to connect wirelessly using an Intel 2200BG mini-pci card.

My router is configured with both WPA/WPA2, and had zero problems with the latest drivers from Intel using 1.11 firmware.
Any chance you can find a fix? Tried switching modes, and the cipher to connect with, but nothing seemed to work.

Thanks!
Logged

Lycan

  • Administrator
  • Level 15 Member
  • *
  • Posts: 5335
Re: BETA FIRMWARE 1.11 B02
« Reply #22 on: August 11, 2008, 10:52:33 AM »

If the CFG files that you are using do not load, try clicking the restore to factory button first.
Logged

mcannon-gso

  • Level 2 Member
  • **
  • Posts: 25
Re: BETA FIRMWARE 1.11 B02
« Reply #23 on: August 11, 2008, 11:04:58 AM »

If the CFG files that you are using do not load, try clicking the restore to factory button first.


Lycan,

I guess I need to ask this question, would this not have already been done by the FW upgrade? Since all my settings were set back to factory.

I am just trying to find clarity...

Thank you,
--Mike
Logged

Lycan

  • Administrator
  • Level 15 Member
  • *
  • Posts: 5335
Re: BETA FIRMWARE 1.11 B02
« Reply #24 on: September 22, 2008, 04:18:15 PM »

Wow, missed this thread.
Sometimes flashing the firmware leaves reminante code in the system memory.
Logged

mcannon-gso

  • Level 2 Member
  • **
  • Posts: 25
Re: BETA FIRMWARE 1.11 B02
« Reply #25 on: September 30, 2008, 09:02:28 PM »

If the CFG files that you are using do not load, try clicking the restore to factory button first.



Lycan,

I have tried this and it still does not work. I tried again going to 1.13 and still no joy..
1.13 has solved some issues i have been having with WISH. It now works again. The way it should..

Keep going with the fixes you'll get there some day =)

Please try to fix the config file issue. It is getting old to have to keep re-typing the whole config every flash.
Logged

haha-pwned

  • Level 1 Member
  • *
  • Posts: 11
Re: BETA FIRMWARE 1.11 B02
« Reply #26 on: January 29, 2010, 09:34:34 PM »

Tired of messing around with D-Link and all the broken promises?  Want to roll your
dgl-4500 firmware back to 1.15 right now?  The two links below have the fix. This
is not a joke.  It works.  Both sites are very reputable and people have tested it.

http://www.ispgeeks.com/wild/modules.php?name=Forums&file=viewtopic&t=4224#15926

and

http://www.dslreports.com/forum/r23720820-downgrade-possible-DGL4500-12xNA115

Follow the simple instructions and tell d-link where to stuff it.

Christmas was a little late this year but better late than never!
Logged

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: BETA FIRMWARE 1.11 B02
« Reply #27 on: January 29, 2010, 09:35:06 PM »

v1.22NA is working great.  ;D
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.
Pages: 1 [2]