D-Link Forums
The Graveyard - Products No Longer Supported => IP Cameras => DCS-5020L => Topic started by: Mitsiboy on November 25, 2013, 09:47:43 AM
-
1. I have 2 DCS-5020l's. Is there a way to make them react faster to a command? If I am on local network, and connecting through mydlink, it is reacts within 4-6seconds. When I am connected through the internet, it may take 10-20 seconds for a movement to happen. I have a 6-8mbs upload speed on my home internet. I use other devices that react alot faster.
2. Is there a way to be able to make the camera pan or tilt while the icon is being press? I would like to be able to hold the "arrow" down and it will move until I let go.
-
1. I have 2 DCS-5020l's. Is there a way to make them react faster to a command? If I am on local network, and connecting through mydlink, it is reacts within 4-6seconds. When I am connected through the internet, it may take 10-20 seconds for a movement to happen. I have a 6-8mbs upload speed on my home internet. I use other devices that react alot faster.
10-20 seconds is too long for Internet connectivity. I personally find that the response time usually falls on the low end of between 4 to 8 seconds. Try rebooting your DCS-5020L and router.
BTW - what make/model router do you have? What firmware version in installed on your DCS-5020L?
2. Is there a way to be able to make the camera pan or tilt while the icon is being press? I would like to be able to hold the "arrow" down and it will move until I let go.
Unfortunately, no.
-
I have a Motorola U-Verse router/modem. Both 5020l have 1.01 firmware version. I have rebooted both cameras and the router with no changes.