• July 25, 2024, 09:38:50 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  


This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: DIR-600 - VPN problem and solution  (Read 34823 times)


  • Level 1 Member
  • *
  • Posts: 2
DIR-600 - VPN problem and solution
« on: May 28, 2010, 07:15:57 AM »

Using WinXP, Cisco anyconnect VPN client here.
Problem: VPN doesn't connect / Connects but "actually" not connected.

Setting to be done on the router:
Here are the steps. Step 1 is probably not needed but I am posting it just in case. Only Step 2 should fix it.

[1] Go to advanced tab > Advanced Port Forwarding Rules ( and configure like this: http://i.imgur.com/TVeIU.png ; Click save settings.
[2] Now go to FIREWALL & DMZ SETTINGS ( and configure like this: http://i.imgur.com/5Uvyd.png (1st 2 entries are present if you've done step 1, the 2rd entry has to be done manually); Click save settings.

Tadaa!  :D

Note: It's UDP-443 with Anyconnect, maybe a different port for a different VPN client. Find that and configure accordingly.

Reply back if this worked with anybody else.
« Last Edit: January 27, 2015, 08:43:05 AM by FurryNutz »


  • Level 1 Member
  • *
  • Posts: 1
Re: DIR-600 - VPN problem and solution
« Reply #1 on: September 05, 2010, 03:56:56 PM »

Thank you! Just what I needed. Using anyconnect aswell


  • Guest
Re: DIR-600 - VPN problem and solution
« Reply #2 on: December 05, 2010, 02:37:21 AM »

 :) just register new user and login to say thank you!
This issue trouble me nearly half  a year.
Thanks again!