• March 19, 2024, 02:15:08 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Author Topic: Feed back on new firmware version 1.14  (Read 11735 times)

walkjp1

  • Level 2 Member
  • **
  • Posts: 63
Feed back on new firmware version 1.14
« on: November 13, 2015, 03:51:59 PM »

Updated my cameras. One seems fine, the other one I will have to take down and do a reset and reinstall, as I am having several problems with it.

How is everyone else`s experience?
Logged

nettewurk

  • Level 3 Member
  • ***
  • Posts: 207
Re: Feed back on new firmware version 1.14
« Reply #1 on: February 22, 2016, 04:36:03 AM »

Mine also!  After quite some time, myDLink displays "DCS-6010L" instead the user name (hostname) I changed.  In the mobile app, once "DCS-6010L" selected, it always report timeout.  While in myDlink website using IE, it prompts me to input password but entering it "correctly" just reports back an error.  Never experienced this since F/W v 1.11 or earlier.  With the same SSID set to other 4 different camera models, they never disconnect.  Don't know why it disconnects from time to time and need to unplug/plug it.  Hope that mine is not an isolated case.
Logged
COVR/DIR/DCS/DNS/DHP/DWA/DRA/DSP

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Feed back on new firmware version 1.14
« Reply #2 on: February 22, 2016, 06:46:53 AM »

Try going back to v1.11?

Mine also!  After quite some time, myDLink displays "DCS-6010L" instead the user name (hostname) I changed.  In the mobile app, once "DCS-6010L" selected, it always report timeout.  While in myDlink website using IE, it prompts me to input password but entering it "correctly" just reports back an error.  Never experienced this since F/W v 1.11 or earlier.  With the same SSID set to other 4 different camera models, they never disconnect.  Don't know why it disconnects from time to time and need to unplug/plug it.  Hope that mine is not an isolated case.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.

nettewurk

  • Level 3 Member
  • ***
  • Posts: 207
Re: Feed back on new firmware version 1.14
« Reply #3 on: February 22, 2016, 10:55:38 PM »

I'm planning to restore it later.  But the problem is, it would continue nag a new version is available.  If a non-technical user of mine would accidentally pressed "Upgrade Now" button, being connected to the WiFi router "wirelessly", it might brick the camera due to transmission disruption over the air.  So maybe that I'll wait for the firmware v1.15 for possible stability fix.   
Logged
COVR/DIR/DCS/DNS/DHP/DWA/DRA/DSP

FurryNutz

  • Poweruser
  •   ▲
    ▲ ▲
  • *****
  • Posts: 49923
  • D-Link Global Forum Moderator
    • Router Troubleshooting
Re: Feed back on new firmware version 1.14
« Reply #4 on: February 23, 2016, 06:24:48 AM »

Might try a factory reset and set up the camera from scratch and see if v1.14 does anything different.
Logged
Cable: 1Gb/50Mb>NetGear CM1200>DIR-882>HP 24pt Gb Switch. COVR-1202/2202/3902,DIR-2660/80,3xDGL-4500s,DIR-LX1870,857,835,827,815,890L,880L,868L,836L,810L,685,657,3x655s,645,628,601,DNR-202L,DNS-345,DCS-933L,936L,960L and 8000LH.