• March 28, 2024, 10:52:30 AM
  • Welcome, Guest
Please login or register.

Login with username, password and session length
Advanced search  

News:

This Forum Beta is ONLY for registered owners of D-Link products in the USA for which we have created boards at this time.

Pages: 1 [2] 3 4

Author Topic: Can't associate 2 cams with the same myDlink account  (Read 50763 times)

blackfox

  • Level 1 Member
  • *
  • Posts: 1
Re: Can't associate 2 cams with the same myDlink account
« Reply #15 on: September 06, 2012, 10:04:33 AM »

Hello all!

I have absolutely the same problem. I successfully assigned my dcs-930l to my myDlink-Account. But as soon as I want to assign a second dcs-932l I get the error message "invalid e-mail and password combination" in the Camera Setup-Utility. But I am 100% sure that the login and the password are absolutely correct!

I can easily setup an second new account for the camera and the camera will be assigned to that new account. But as soon as I want to put two cameras to one account I get this error ...

Any solution for the problem handy?

Thanks,
Michael
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Can't associate 2 cams with the same myDlink account
« Reply #16 on: September 06, 2012, 10:06:07 AM »

Hello all!

I have absolutely the same problem. I successfully assigned my dcs-930l to my myDlink-Account. But as soon as I want to assign a second dcs-932l I get the error message "invalid e-mail and password combination" in the Camera Setup-Utility. But I am 100% sure that the login and the password are absolutely correct!

I can easily setup an second new account for the camera and the camera will be assigned to that new account. But as soon as I want to put two cameras to one account I get this error ...

Any solution for the problem handy?

Thanks,
Michael

Are both DCS cameras assigned to different IP addresses?  (static and/or reserved IPs)
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

santhy

  • Level 2 Member
  • **
  • Posts: 26
Re: Can't associate 2 cams with the same myDlink account
« Reply #17 on: October 03, 2012, 01:52:20 PM »

Updated to the last firmware with both cams and tried many different versions of the wizard but still no luck...
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Can't associate 2 cams with the same myDlink account
« Reply #18 on: October 04, 2012, 04:40:28 AM »

This may be a stretch, but are you using the latest Wizard software? There were several builds released for the DCS-932L wizard software.
« Last Edit: October 04, 2012, 04:52:32 AM by JavaLawyer »
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

santhy

  • Level 2 Member
  • **
  • Posts: 26
Re: Can't associate 2 cams with the same myDlink account
« Reply #19 on: October 20, 2012, 09:20:57 AM »

yep, and I get the no network connection error with it...
Logged

brianalls

  • Level 1 Member
  • *
  • Posts: 2
Re: Can't associate 2 cams with the same myDlink account
« Reply #20 on: October 31, 2012, 08:46:37 AM »

Has anybody come up with a solution for this?  I liked the Mydlink system so much that after a week I bought a second camera, only to run into this issue.  It's weird, because the cameras both work with separate accounts.  I was thinking about getting a mydlink enabled NAS too, but I'm afraid I will need yet another email address.
Logged

kaiserskier

  • Level 1 Member
  • *
  • Posts: 2
Re: Can't associate 2 cams with the same myDlink account
« Reply #21 on: November 10, 2012, 04:47:04 AM »

I got the same problem upon trying to add a third camera while 2 already working ok under the same account. I end up resetting all cams to factory default, unregistering the cams from my account, deleting my account and tried everything again from scratch as if I had just purchased all three cams, and it only got worse. Now I cannot register any 2 cams under the same account as I get a unrecognized user/pass error after adding the first cam. This sucks. I`ve seem people complaining about this for almost 1 year now and no solution?!?!
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Can't associate 2 cams with the same myDlink account
« Reply #22 on: November 13, 2012, 05:18:46 AM »

Are there other DCS-932L owners (or other DCS model owners) who are also experiencing this issue? Please post here.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

peter3629

  • Level 2 Member
  • **
  • Posts: 27
Re: Can't associate 2 cams with the same myDlink account
« Reply #23 on: November 23, 2012, 06:09:08 PM »

I bought a second 932L today and had the same problems listed above - invalid email and password combination or no network detected. I kept trying for hours and now it is up and running. Both cameras are now linked under one account. I have both cameras hooked up at the same time and then started the set up wizard. It allowed me to set up the new one and under the same account.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Can't associate 2 cams with the same myDlink account
« Reply #24 on: November 24, 2012, 07:32:44 AM »

Thanks for your contribution. Do you recall doing anything differently that allowed you to finally get both cameras to associate with the same mydlink account?
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

peter3629

  • Level 2 Member
  • **
  • Posts: 27
Re: Can't associate 2 cams with the same myDlink account
« Reply #25 on: November 24, 2012, 08:39:13 AM »

First of all, I have to download the set up wizard to a sd card. Then I retrieved the DCS-932L-2428 folder from there and press auto run. Following the instructions and the 2 cameras will both show up to proceed further. I could not do so without using the sd card. Hope this helps.
Logged

peter3629

  • Level 2 Member
  • **
  • Posts: 27
Re: Can't associate 2 cams with the same myDlink account
« Reply #26 on: November 24, 2012, 08:45:04 AM »

Forgot to mention I did not deactivate or reset anything.
Logged

JavaLawyer

  • BETA Tester
  • Level 15 Member
  • *
  • Posts: 12190
  • D-Link Global Forum Moderator
    • FoundFootageCritic
Re: Can't associate 2 cams with the same myDlink account
« Reply #27 on: November 24, 2012, 10:02:16 AM »

Thanks for the update.
Logged
Find answers here: D-Link ShareCenter FAQ I D-Link Network Camera FAQ
There's no such thing as too many backups FFC

xleo

  • Level 1 Member
  • *
  • Posts: 2
Re: Can't associate 2 cams with the same myDlink account
« Reply #28 on: January 09, 2013, 03:34:26 AM »

Same problem here...   ???>:(
Logged

Gooroos

  • Level 1 Member
  • *
  • Posts: 2
Re: Can't associate 2 cams with the same myDlink account
« Reply #29 on: January 16, 2013, 10:19:58 AM »

I have DCS-1130 and DCS-932.
The problem discussed here is REALY EXIST.
I'm an experienced user and I've been spent hours trying to get it working with no result.
And D-Link is not going to do anything to solve this problem.

E-mail support is useless. They "don't have any problem". What kind of proof D-Link needs to look into this problem??!!!

The "solution" by peter3629 is not working or instructions are not correct.
Logged
Pages: 1 [2] 3 4